I've got a fortigate 40C here and copied the config mainly from a Fortigate60. Everything is working fine, but I've got some problems with the PPTP VPN connection. I want to add SSL VPN in the future, but for now PPTP is fine.
At the moment I got a working configuration, but some things are not working properly.
- the DNS server is not pushed to the client. It should be 192.168.6.1 like via DHCP.
- the client should use the gateway 192.168.6.1, not 192.168.160.1
I use the OS X VPN client to connect and I've added the dns entry + network settings manually, so it works.
Does anyone have an idea how to get the DNS + Gateway pushed properly to the client?
config system dns
set primary 8.8.8.8
set secondary 8.8.4.4
set domain "lan"
end
config firewall address
edit "all"
next
edit "Internal_Range"
set subnet 192.168.6.0 255.255.255.0
next
edit "PPTP"
set associated-interface "wan1"
set type iprange
set end-ip 192.168.6.180
set start-ip 192.168.6.160
next
end
config firewall policy
edit 1
set srcintf "internal"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set action accept
set schedule "always"
set service "ANY"
set nat enable
next
edit 50
set srcintf "wan1"
set dstintf "internal"
set srcaddr "PPTP"
set dstaddr "all"
set action accept
set schedule "always"
set service "ANY"
next
edit 4
set srcintf "wan1"
set dstintf "wan1"
set srcaddr "PPTP"
set dstaddr "all"
set action accept
set schedule "always"
set service "ANY"
set nat enable
next
end
config vpn pptp
set status enable
set eip 192.168.6.180
set sip 192.168.6.160
set usrgrp "Wizard_users"
end
config system dhcp server
edit 1
set default-gateway 192.168.6.1
set domain "lan"
set interface "internal"
config ip-range
edit 1
set end-ip 192.168.6.159
set start-ip 192.168.6.100
next
end
set lease-time 345600
set netmask 255.255.255.0
set dns-server1 192.168.6.1
next
end
config system interface
edit "wan1"
set vdom "root"
set mode pppoe
set allowaccess ping
set type physical
set alias "FTTB Fixed IP"
set username "X@X"
set password ENC X
set defaultgw enable
set dns-server-override disable
next
edit "modem"
set vdom "root"
set mode pppoe
set type physical
next
edit "ssl.root"
set vdom "root"
set type tunnel
next
edit "internal"
set vdom "root"
set ip 192.168.6.1 255.255.255.0
set allowaccess ping https ssh
set type physical
set alias "LAN"
next
end
edit: The DNS server, the gateway are all on the Fortigate unit with the IP 192.168.6.1.
192.168.16.1
is the gateway, the DNS server, and the IP of the internal interface for clients to use? Is your client receiving the DNS server config via DHCP (please verify)? Sorry I missed this, where is your DNS server? If it's the Fortigate's DNS server daemon, you might need to take some internal routing steps on the Fortigate.