0

I have a HP StorageWorks MSA2312i Dual Controller Modular Smart Array and a second enclosure.

I have four vdisks:

  • vd01 (RAID5) (Current Owner A)
  • vd02 (RAID5) (Current Owner B)
  • vd03 (RAID10) (Current Owner A)
  • vd04 (RAID10) (Current Owner B)

With two volumes per vdisk (vd01_001, vd01_v002 and so on)

The problem is that while Xen can see all the volumes in vd01 and vd02 (whose main controllers are A and B respectively), Xen cannot see any other volumes from vd03 and vd04.

Any ideas?

EDIT: The complete log of a full conection from XenCenter

EDIT2: If I add the disks of the second enclosure to a vdisk with disks of the first enclosure, I can see the new space, as workaround.

2
  • you're going to have to add a lot more detail to the actual problem here; logs etc?
    – Chopper3
    Sep 29, 2014 at 9:13
  • Ups! Logs added :) Sep 29, 2014 at 10:46

1 Answer 1

0

I found without any explanation, the solution.

The vdisk need to start with 00.

vd00, vd01, vd02 and vd03 just works.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .