I use OpenVPN on Ubuntu Server as VPN Server, and Viscosity successfully working with this client configuration:
xxx.no-ip.org remote udp 1194
dev tun
tls-client
ca ca.crt
cert cert.crt
key key.key
tls-auth ta.key 1
persist-tun
persist-key
persist-local-ip
auth-user-pass
comp-lzo no
nobind
pull
dhcp-option DNS 192.168.8.1
BF-CBC cipher
Now, I want to implement that configuration in my Linksys E2500 flash with Tomato (v 1.28 shibby) This configuration of what I have done;
'VPN Tunneling > OpenVPN Client' menu
'Basic' tab:
- Start with WAN: Check
- Interface Type: TUN
- Protocol: UDP
- Server IP address / Port: 1194 xxx.no-ip.org
- Firewall: Automatic
- Authorization / Password Authentication: Check
- Username: myusername
- Password: *******
- Username Authen. Only: Uncheck
- Extra HMAC authorization (tls-auth): Outgoing (1)
- Create NAT on tunnel: Uncheck
'Advanced' tab
- Poll interval: 0
- Redirect traffic: Uncheck
- Accept DNS configuration: Strict
- Encryption cipher: BF-CBC
- Compression: Disabled
- TSL Regeneration Time: -1
- Connection retry: 30
- Custom Configuration:
persist-tun
persist-key
persist-local-ip
comp-lzo no
nobind
pull
dhcp-option DNS 192.168.8.1
'Keys' tab
- Static Key: [content of ta.key file]
- Certificate Authority: [content of ca.cert file]
- Client Certificate: [content of cert.crt file]
- Clent Key: [content of key.key file]
and I was able to do 'Start Now' but this seems not work because I can not access any resources on the network under the VPN server which that I can do when I connect with Viscosity.
So, what I miss?