0

Hi I have a Dell Powervault 1220 mounted to a PERC H800 (/dev/sda)

I'm really confused on how to use dells monitoring software, srvadmin.

According to this question, I should use omreport.

However, what is the controller id I'm looking for? 

/opt/dell/srvadmin/bin/omreport storage pdisk -?
pdisk            Display physical disk(s) properties.

Required parameters are:
controller=id               All physical disks are displayed

Optional parameters are:
vdisk=id                    All physical disks that comprise the indicated
                            virtual disk
cachecade=id            All physical disks that comprise the indicated
                            cachecade(s)
connector=id                  All physical disks on the indicated connector
pdisk=<PDISKID>               The indicated physical disk
    where PDISKID=<connector:enclosureID:portID | connector:targetID>

Also, I'm using ubuntu14.04

Improve this question

1 Answer 1

Reset to default
0

To get the controller ID you use the controller option:

omreport storage controller

Depending how many controllers in your system you may get a number of results back, to narrow it down look at the Name of the controller:

omreport storage controller | grep "ID\|Name"
ID                                            : 0
Name                                          : PERC 6/i Integrated

This system only has a single controller so the controller ID to use is 0:

omreport storage pdisk controller=0
omreport storage vdisk controller=0
Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .