1

I have Lycom PE-115 SATA 3 2 Port 6Gbps Low Profile PCI-e 2.0 Host Adapter in my machine running FreeNAS. It seem have some trouble with SMART of SanDisk SSD Plus I connected to it.

I've seen reports people had to do a firmware updates for USB controllers based on similar chip as PE-115 uses, however I cannot find any downloads and instructions how to perform such update. Lycom's webpage is rather poor and doesn't seem to offer firmware updates. Anyone seen this controller in action and maybe had a chance to perform a firmware upgrade?

2
  • Does that HBA even have firmware? Oct 15, 2016 at 1:21
  • Good point. But... presence of the same chip in some USB based stuff indicates it probably has. And to be honest - it's hard to imagine SATA chip without any... at least to identify on PCI Express bus.
    – Michał F
    Oct 24, 2016 at 15:11

1 Answer 1

-1

Marvell MV-9128 chip. Updated firmware on my Lycom PE-115 (to 2.3.0.1007) with download from station-driers using a FreeDOS USB boot drive.

www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=fileinfo&id=1572&lang=en

1
  • 3
    Be very careful with sites like station-drivers. This particular one is "safe" (the site itself is, maybe not the files on it), but those files are user-submitted with few to no quality checks beyond an optional review process. In general, get your drivers from the manufacturers and never these sites unless you don't care whether the file is safe or not.
    – Spooler
    Oct 29, 2018 at 16:45

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .