1

Well, somewhere I has read that my machine has a problem reading all the RAM because of the 32-bit limitation:

http://xenserver.org/blog/entry/the-reality-of-a-64-bit-dom0.html

enter image description here

I don't underestand anything, can somebody explain what this means?

http://discussions.citrix.com/topic/265801-xenserver-detected-just-3319mb-ram-howto-set-more/

enter image description here

My problem here is that I have also an Asrock MB and I don't know if the problem is here, or is with my instalation:

enter image description here

Somewhere, outside my home, I have also installed XenServer with the same ISO and 4GB and everything is working fine.

But here not, I don't know exactly if I have to patch something... Because in the first image the Xen Project Hypervision redirects me to: http://xenproject.org/developers/teams/hypervisor.html

That means that If I install this packet I will fix this?

Can somebody explain all this to me?

Please, don't downvote me, I don't know if the things I'm asking is in the correct way, I didn't talk of any of this things by myself because I don't understand anything, so any help is welcome.

EDIT:

There are some posts I have also readed that I didn't understand:

https://wiki.xen.org/wiki/Xen_Project_Software_Overview

https://wiki.xen.org/wiki/Dom0_Kernels_for_Xen

Can somebody tell clearly what I need to do, or to know to solver this issue?

By the moment I understand that XenServers runs on 64-bit (I don't have any 32-bit option, but I can't prove that this is really 64-bit), but that part that controls the hardware is in 32-bits, how this is possible? Can I fix this? Why in my other machine using the same ISO I don't have problems? That means that I have a problem with my hardware, is there any compatibility issue?

EDIT2:

enter image description here

Intel (R) virtualization is enabled... So, the only thing, that you have to do is tell me to check things by the moment.

But there is something that was unexpected:

enter image description here

When the BIOS is loading, it tell me that it has 3319MB, that I think is RAM, and XenServer only can use 3318MB... So, can I imagine that the BIOS detect the two modules, but, It only uses 3318MB, actually the problem is not in XenServer, the real problem is with the hardware???

Thanks!

6
  • In big, you have more than 4gb of ram in the server, the motherboard only see 4gb, and xenserver dont want to install ?
    – yagmoth555
    Feb 14, 2017 at 19:14
  • Nope, I have 4096MB of RAM physically installed, but XenServer only uses 3318MB, and I want to know if there is any apparently cause of this, and how can I solve this. Thanks @yagmoth555
    – z3nth10n
    Feb 14, 2017 at 19:15
  • is virtualisation enabled in the motherboard ? see there for maybe where the setting is; forum.asrock.com/…
    – yagmoth555
    Feb 14, 2017 at 19:20
  • Mmmm... I hadn't check that, but If this relevant, and also, if it was disabled, I couldn't run any VM, but actually I could. So, where is the problem!!? :/ thanks anyway, I will check that.
    – z3nth10n
    Feb 14, 2017 at 19:23
  • I just edited my post, there is something interesting...
    – z3nth10n
    Feb 14, 2017 at 19:56

1 Answer 1

0

I solved myself the problem.

It was problem of the BIOS, because I bought two modules of 2GB of DDR2 and I had to activate the Memory Remap option.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .