4

I'm having a hard time understanding the spec. sheet. It says there is a max storage cap of 12TB for the entire system, but does not specify a disk size restriction.

Should I assume the HDD cap is 2TB (* 6 bays)? Any chance this 12TB is a soft cap (i.e. limit has raised with firmware updates)? I really want to max out the storage capacity of this unit.

Edit: Spec link: http://www.dell.com/ai/business/p/poweredge-r610/pd

Improve this question
4
  • 1
    Maybe provide a link to the spec sheet?
    – joeqwerty
    Sep 29, 2017 at 16:25
  • @joeqwerty good call. Added
    – patrickgamer
    Sep 29, 2017 at 17:14
  • Hi @patrickgamer did you find my answer helpful?
    – Marco
    Oct 10, 2017 at 3:15
  • Yeah sorry. Got sucked into a memory problem. Voted accordingly.
    – patrickgamer
    Oct 10, 2017 at 5:33

1 Answer 1

Reset to default
8

Just to share my config, i got a PERC H700 (inside a R410 server) with the firmware version 12.3.0-0032 and my 4 new hard drives IronWolf 10 TB are seen as 2 TB drives. After upgrading the firmware to version 12.10.7-0001, they are now fully functionnal and i have create a big RAID 5 array.

According to DELL forums, people reported to have 10TB drives working with Firmware Version 12.10.7-0001.

Anyway there is no such specification because according to DELL, they only support DELL drives. It's the same for newer 730 and 740 models too. Datasheets don't talk about drives.

When you try to install drives newer than the controller, always look for controller's firmware updates before. At least, that's what I use to do.

I am answering here because I already had some positive experience with PERC H730 with 3TB drives and latest (at that time) firmware, don't remember the fw version though, in both DELL's R230 and T130, BTW I googled all this in three minutes.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .