0

So I finally got my Fantec SRC-2080x07 2U server chassis replacement.

Only to find out that the Be Quiet TFX Power 2 300W Gold PSU that I ordered, is too small to fit.

Here's a picture of the PSU in the server case:

enter image description here

I thought a TFX form factor would fit because it looked like it had the same 3 mounting holes, but apparently not.

What form factor PSU does this chassis need? or is there maybe a bracket that I can use to still use this PSU? (it's upside down because the fan would be at the bottom otherwise)

Improve this question
7
  • 1
    Perhaps one like the manufacturer sells with the chassis?
    – Michael Hampton
    Sep 4, 2018 at 14:51
  • That doesn't tell me anything about the form factor of the PSU. I'd like to buy my PSU from a reputable brand.
    – xorinzor
    Sep 4, 2018 at 14:53
  • 1
    It's a 2U form factor, like the specs say. You can find these anywhere in Europe or the USA.
    – Michael Hampton
    Sep 4, 2018 at 14:53
  • But what am I looking for? ATX, TFX, something else entirely?
    – xorinzor
    Sep 4, 2018 at 14:55
  • No, you are looking for 2U. e.g. search amazon.de for 2U Netzteil and you will get the correct form factor.
    – Michael Hampton
    Sep 4, 2018 at 14:55

2 Answers 2

Reset to default
0

maybe this is this adapter you can print it

https://www.thingiverse.com/thing:4317040

Bought FSP550-802U and it similar issue its somehow fit on front but not on back and only 2 screw was attached (2 screws front)

it shoudl have 3 screws on front (i will try it)

Improve this answer
0

That case uses an ATX/EPS PSU, see https://www.fantec.de/en/products/server-products/19-inch-server-storage-cases/produkt/details/artikel/1670_fantec_src_2080x07/

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .