0

After rebooting my machine, I have found many services have stopped starting automatically. If I start them with their init scripts once the machine is booted, they start without any problems. Strangely enough, if I run sudo init 5 once logged in, most services will start (although some still seem to refuse without manually running their init scripts.

I can't think of anything that's changed since I last rebooted my machine and system logs don't seem to show anything useful. Any help is always appreciated!

Update: I have verified both by using chkconfig and examining scripts in /etc/rc*.d folders that the services are configured to start and that the scripts run correctly.

Improve this question

3 Answers 3

Reset to default
3

This is a confirmed bug of 9.10. See https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/497299

I changed the line 9 of /etc/init/rc-sysinit.conf from "start on (filesystem and net-device-up IFACE=lo)" to "start on filesystem and net-device-up". It's worked for me.

Improve this answer
2
  • I'll check the system when I get into the office today, but this sounds exactly like what I'm experiencing.
    – Michael Mior
    Jan 18, 2010 at 13:18
  • Thanks! I tried updating /etc/init/rc-sysinit.conf as you suggested,which didn't help. However, updating /etc/network/interfaces as suggested in the bug report did the trick!
    – Michael Mior
    Jan 18, 2010 at 15:34
0

Have you verified the services are activated for your default runlevel? You can get your current runlevel with runlevel. You can verify the activated runlevels with chkconfig --list <servicename>.

Improve this answer
2
  • chkconfig isn't installed by default in Ubuntu; you need to install the chkconfig package.
    – womble ♦
    Jan 7, 2010 at 0:56
  • This isn't an answer and should be posted as a comment. But yes, I have verified that the services are activated.
    – Michael Mior
    Jan 7, 2010 at 15:47
0

How did you add those services? Usually with Ubuntu you add and/remove links to the rc services with the update-rc.d command:

root@hostname:~# /usr/sbin/update-rc.d
usage: update-rc.d [-n] [-f] <basename> remove
       update-rc.d [-n] <basename> defaults [NN | SS KK]
       update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] .
       update-rc.d [-n] <basename> disable|enable [S|2|3|4|5]
                -n: not really
                -f: force

I'd try to update the init scripts in question with that command to see if that addresses.

Now if the services were not added via apt-get and your installed them manually, that's a different story. Which services in question did not start?

Improve this answer
2
  • All the services were installed automatically with apt-get and were previously working. Services that didn't start include ssh, webmin, monit, and several others. I don't have a complete list. (As an aside, I installed monit AFTER I had this problem and it also does not start)
    – Michael Mior
    Jan 7, 2010 at 18:05
  • I could be wrong, but it sounds like its at init 1, since most of the multi-user servers start at around 2 (for Ubuntu , at least): root@host:~# who -r run-level 2 2009-12-29 05:47 I thought that it is set to level 1 by accident, but as it turns out, there is no inittab for some time. :( that said, you may want to check anyway and if you see that it has been installed, change it to either level 2 or 3.
    – Rilindo
    Jan 7, 2010 at 20:22

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .