I am trying to set up a cisco 2800 series router in my home lab. yes its old, but cheap enough to play around with.
So I am coming up against a problem configuring the router.
I can ping out to the internet from the router directly. so its making a pppoe connection just fine.
I can ping the router from a connected pc which is getting assigned its appropriately assigned ip details. I cant however get an internet connection on that router, pinging googles dns server fails and pages wont load.
I am sure i have missed something but have no clue as to what that might be.
Here are the steps taken to set the configs. fa0/0 connects to a modem, fa0/1 connects to a computer (will be a switch)
conf t int fa0/0 no shut pppoe enable group global pppoe-client dial-pool-number 1 exit int dialer 1 no shut ip address negotiated encapsulation ppp ip tcp adjust-mss 1442 dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname ******* ppp chap password ******* exit ip route 0.0.0.0 0.0.0.0 dialer 1 exit conf t int fa0/1 ip address 10.0.2.1 255.255.255.0 no shut exit service dhcp ip dhcp pool lan1 network 10.0.2.0 255.255.255.0 default-router 10.0.2.1 dns-server 220.127.116.11 18.104.22.168 lease 1 exit ip dhcp excluded-address 10.0.2.1 10.0.2.25 int fa0/1 ip nat inside exit int dialer 1 ip nat outside exit ip nat inside source list 1 interface dialer 1 overload exit