I've followed HPQ's "Moving Drives and Arrays" criteria and pulled my data array (10+2) cold. Therefore I would expect the data array to mount on any HPE smart array server. The one exception is moving the array back to the original server where the drives are "missing" and the data array "failed." The boot array (6+2) has flagged the data array as "failed" and I'm afraid that the P830 will resilver rather than remount the data array. I could pull all drives to reset the controller, cycle power, and mount the data array but then I have the same problem in reverse. I believe the P830 will mount the data array but flag the boot array "failed." How do I get both online together?