1

I think its a silly question but still here it goes..

Terminal Output:

eth0      Link encap:Ethernet  HWaddr 00:1c:c0:37:5e:25  
          inet addr:10.100.98.51  Bcast:10.100.98.255  Mask:255.255.255.0
          inet6 addr: fe80::21c:c0ff:fe37:5e25/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29677 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:3179007 (3.1 MB)  TX bytes:610142 (610.1 KB)
          Memory:e0380000-e03a0000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:76 errors:0 dropped:0 overruns:0 frame:0
          TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:9555 (9.5 KB)  TX bytes:9555 (9.5 KB)

vpn_0     Link encap:Ethernet  HWaddr 00:ac:39:95:a1:16  
          inet6 addr: fe80::2ac:39ff:fe95:a116/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1786 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500 
          RX bytes:128597 (128.5 KB)  TX bytes:468 (468.0 B)

Actually, I followed this tutorial to setup the PacketiX VPN on ubuntu. Now, how do I actually use this VPN?

Terminal Output:

shadyabhi@shadyabhi-desktop:~$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.100.98.0     *               255.255.255.0   U     1      0        0 eth0
link-local      *               255.255.0.0     U     1000   0        0 eth0
default         10.100.98.4     0.0.0.0         UG    0      0        0 eth0
shadyabhi@shadyabhi-desktop:~$

As told in tutorial, if I do

route del default
route add default dev vpn_0

I am not able to surf the internet. And I get the route command output as:

root@shadyabhi-desktop:/home/shadyabhi# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.100.98.0     *               255.255.255.0   U     1      0        0 eth0
link-local      *               255.255.0.0     U     1000   0        0 eth0
default         *               0.0.0.0         U     0      0        0 vpn_0
root@shadyabhi-desktop:/home/shadyabhi#

I know I am not able to route the traffic properly. How do i do that?

1

you skipped step 7 on that guide.

1

As Justin said,

you don't have an IP address for vpn_0 so packets don't know where to go to get to and from your network.

It seems you missed the step

dhclient vpn_0

which should have come back with an address if all is working.

Peter.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.