0

(I'm asking this for a friend and I'm don't know most of this technical stuff, so I'm sorry in advance if I'm not clear enough to describe the problem)

Where can i find any information about how to configure a Fibre Channel switch ( QLocic , Mini GBic, QME2572 ) to make it communicate with a Dell R905 and a Dell M905 Blade Server ?

Many thanks in advance

Pierre

1
  • 1
    ummm... RTM? ;)
    – einstiien
    Mar 16, 2010 at 16:51

1 Answer 1

2

Plug the server into the switch with the appropriate cable.

For more complicated settings, refer to the switch's manual (which should have come with the switch or be available for download from the manufacturer).

However from the question, I don't think this is what you want. It sounds like you have two computers and one FC switch. Unless you also have a storage device, you need to configure one side to pretend to be the storage. Note that in any case you'll need Fiber Channel cards to make this work.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .