3

It seems there is only an option for:

Raid 1+0 Raid 0

I got two Disk, and wish to do a mirror. What are the options for me? Thanks.

Improve this question

4 Answers 4

Reset to default
5

You can't by definition have a RAID 1+0 disk array with only two disks. Create an array as RAID 1+0 with two disks you will have a RAID 1 array.

Improve this answer
3
  • Ravi isn't trying to do RAID 10, he just doesn't see the option to create a RAID 1. You should probably delete your "answer".
    – pplrppl
    Jun 8, 2010 at 15:35
  • I'm not sure what the problem with my "answer" is. HP don't differentiate between RAID1+0 and RAID1 in the array tool. I've dug out a copy the HP Array Configuration Utility User Guide (docs.hp.com/en/9320/acu.pdf) which confirms it on page 62
    – Mike1980
    Jun 8, 2010 at 17:49
  • +1 This is the correct answer - not sure other than HP does it but it's basically standard to use RAID1+0 as the "generically named" formula and applied to two disks it will actually just be a RAID1 array. May sound weird but that's how it's been for a long time now and it actually makes a little sense, if you want a generic name for mirroring across a random number of discs this is basically it, quirky as it may be ^^
    – Oskar Duveborn
    Jun 13, 2010 at 9:35
1

According to the manual, http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf , if you're in the BIOS ROM utility ("ORCA"), they term a RAID-1 (mirror) as a "RAID 1+0". Select the controller, press F8, select the drives and RAID level, confirm, and exit the utility.

Improve this answer
1

If firmware version HP Smart Array P420i Controller is older then 3.04, only RAID 1+0 is available and should be used

Improve this answer
0

The p410i supports for sure raid 1.
Are you trying with the bios utility or smart start?

Improve this answer
6
  • Doing it with bios utility. Smart start only shows Raid 0/Array and I see no options for Raid 1 there either.
    – Ravi
    Jun 6, 2010 at 9:29
  • Has the controller a cache? Is the Zero Memory Raid (ZMR) enabled? Did you try to upgrade all the bioses?
    – PiL
    Jun 6, 2010 at 9:44
  • I am seeing 0% Read/0%Write in Cache ratio. Does that mean it doesn't have a cache? Can't find option for ZMR.
    – Ravi
    Jun 6, 2010 at 9:56
  • I bought this server in November 2009, and it's a G6. Will it be necessary to make a Bios upgrade?
    – Ravi
    Jun 6, 2010 at 10:19
  • On my servers I try to keep the bios up to date. All the bioses for your server can be downloaded with this cd h20000.www2.hp.com/bizsupport/TechSupport/… It find automatically every update your machine needs.
    – PiL
    Jun 6, 2010 at 10:37

You must log in to answer this question.