0

I have a windows 2003 server here which occasionally froze every couple of weeks.

Now it is happening every day. It has been hanging sometime during the night. How can I setup a running log of cpu/program/memory usage to see if there is a program or task which is causing it to freeze?

I thought it could have been the backup, but I can run a backup task during the day (writing to the tape drive) and it works without any issues.

Any thoughts or suggestions would be very appreciated.

2 Answers 2

0

You use the term "freeze", which would imply that the machine is halting. In my experience, if you're not seeing a kernel STOP (a "blue screen") but rather are seeing something like, say, blank video or a static video display w/ no activity (and, in particular, no mouse pointer movement) then I'd be more suspicious of flaky hardware than of software.

If the machine doesn't have ECC memory I'd bring down a copy of MemTest86+ and give the RAM a thorough test.

If it does have ECC RAM (and you're not logging any memory errors) or it passes a few hours of MemTest86+ w/o error (for non-ECC RAM) I'd consider giving the box a few runs of the manufacturer's own diagnostics.

There's certainly a chance that it's not a hardware problem, but "freezing" in Windows, in my experience, has usually been hardware-related.

3
  • The screen turns itself off after a certain amount of time. When I get back in the morning, no keyboard or mouse moments can wake it up. I've ran suppliers diagnostics on memory and it returned all fine. For all 6 sticks of RAM they all had: Multi-Bit Status=0,Single-Bit Threshold Count=0, Multi-Bit Status=No DIMM errors detected,Single-Bit Threshold Exceeded Status=No DIMM errors detected,Memory type=DDR2 SDRAM FB-DIMM
    – Mike
    Dec 7, 2010 at 4:32
  • I haven't run a memtest on it, it is slightly more difficult to do this because its a production server without a slave
    – Mike
    Dec 7, 2010 at 4:37
  • When you say it cant be woken up, I assume at this point all communication with the server halts also?
    – JamesK
    Dec 7, 2010 at 10:30
0

I had this same problem with one of my servers a few years ago. I wouldn't get any error logs indicating a problem. Event viewer was clean until I manually rebooted in the morning and it said "Previous shutdown was unexpected."

I swapped the Hard Drive, tested and swapped the RAM, swapped network cards. Nothing worked. Finally I took the original hard drive, put it into an identical server, and the crashes stopped. I could never replicate the problem, and every test came back clean.

I never figured out what the actual problem was, but the only options left were the motherboard and I guess the on board video card.

This is most likely a crucial hardware failure. Do you have a spare server you can failover to for a little while to test your hardware?

4
  • That sounds exactly like the problem I have. I wish I had another server to use as failover for a while, however the other two servers are in production as well. The event viewer is clean also. Ugh :(
    – Mike
    Dec 7, 2010 at 5:57
  • If you have bad hardware, you will eventually need to replace it. If the problem is justifying/proving this to someone else, maybe you can setup a regular desktop to run your application temporarily. Just to keep it running while you investigate the primary hardware issues, and then replace it if needed.
    – minamhere
    Dec 7, 2010 at 12:40
  • Do you have a warranty? Maybe this is much simpler.
    – minamhere
    Dec 7, 2010 at 12:41
  • Also, here was my original question on ServerFault. Maybe there are a few suggestions you can try that could at least lead you closer to identifying the problem. serverfault.com/questions/46511/…
    – minamhere
    Dec 7, 2010 at 12:45

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .