Has anyone else gotten it to work?

My setup:

Router: Netgear WNR3500v2
   WAN IP: y.y.y.y
   Radius: off
   Wireless Security:
      Security Mode: WPA2 Enterprise
      WPA Algorithms: AES
      Radius Auth Server Address: x.x.x.x
      Radius Auth Server Port: 1812
      Radius Auth Shared Secret: password
      Key Renewal Interval (in seconds): 3600

TekRadius Server:
      test (username), User-Password (check): 1234, TLS-Server-Certificate (check) [created with TekCERT]
      Default (NAS), password (secret)
      y.y.y.y (NAS), password (secret)
      Service Parameters:
         Listen IP Address: x.x.x.x
         Authentication Port: 1812
         PEAP Inner Auth Method: EAP-MS-CHAP-v2

Computer Trying to Authenticate: Mac: 10.6.5
   Recognizes that the auth needs user/pass. 
   I type in test and 1234, nothing happens, it asks again.  
   Sometimes it "connects" says its authenticating, 
       and then disconnects, and then repeats.

Hardware setup: TekRADIUS on Windows 7, plugged directly into the router. Mac, trying to wirelessly authenticate with the netgear and the radius server.

Notes: I've been running wireshark while I've been trying to connect, and applied a filter of 'radius', and no packets have shown up.

In the TekRADIUS log, it shows nothing except when the server starts and stops, and these messages:

12/7/2010 5:06:34 AM - IP address configuration change has been detected

Which is weird, cause the IPs aren't changing.


support of DD-WRT with WPA2 and RADIUS is broken. the nas process on dd-wrt stops working after the first answer. do a search, there are several people (including me) having this on their hardware too.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.