Has anyone succesfully configured informix 10 snmp subagent to work with net-snmp in linux or windows?
Well, to answer the question I'm sure someone has!
But I suspect you're asking if it's possible. And it would depend on how the Informix subagent behaves. It's likely implementing one of: SNMP directly (in which case you need to "proxy" to it with Net-SNMP), AgentX (which is the IETF designed subagent protocol and Net-SNMP supports it) or SMUX (which is an older subagent protocol that Net-SNMP also supports).
So the answer to "can I" is certainly "yes".
I'm rewriting my answer because today I already configure Informix SNMP to work on Linux and AIX. Not windows...
Today I monitor it with Zabbix Server with SNMP service. I have created a Zabbix Template for Informix what you can found here : https://www.zabbix.org/wiki/Zabbix_Templates#Database
With the Zabbix template I wrote a readme file where have the explanation to configure the Informix SNMP with AIX, but is valid for Linux too.
I will copy part of this readme here:
About SNMP and Informix Informix have a special service for SNMP where is installed on default installation, you will found it on : $INFORMIXDIR/snmp **** As far I know , there is no additional licence to use it. There you will found the runsnmp.ksh script and .mib files rdbms, apps, omni for SNMP v1 and v2. For this template I was used the SNMP v2 MIBs . You can found the last documentation (Informix v12.10) here : http://pic.dhe.ibm.com/infocenter/informix/v121/topic/com.ibm.snmp.doc/snmp.htm or PDF here: http://www-01.ibm.com/support/docview.wss?uid=swg27023505 Informix offer the SNMP Master agent and the sub-agent. On "perfect world" , you should use only the sub-agent and integrate it with the Master Agent of your machine/OS where Informix is running (supposing have a SNMP service active on your OS) But this requires some compatibility and manual configuration (very annoying) If you want try this, please read the official documentation/manual. In past I already try configure the Informix sub-agent with Linux Red Hat Master Agent, without success, the workaround is use the Informix SNMP Master Agent. Today I work with AIX environment and to keep it simple I choose work with Informix SNMP Master Agent (I not try configure the Informix sub-agent with AIX SNMP Master Agent). Our AIX have SNMP service active, this way we have two Master Agent on same OS, what is 100% possible, but requires adjustments of the configuration on Informix SNMP Master Agent. Delay on recent releases: The SNMP service seems to have been forgotten by engineers from IBM and a lot of new features aren't included into it. I have open a feature request on IBM RFE site to improve/update the SNMP service: Headline: improve/update SNMP service ID: 35921 http://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=35921 If you have interest on it , please follow the link, sign up and vote on the feature, if have suggestion use the comment tab. -------------------------------------------------------------- How active the SNMP service on Informix? Is quite simple, but have a pre-requisite : the SNMP service *needs* run with root user. * Log in with root * Set your informix enviroment (INFORMIXSERVER, INFORMIXDIR, INFORMIXSQLHOSTS, etc)] * cd $INFORMIXDIR/snmp * ./runsnmp.ksh start And finish!!! If you already have a Master Agent running on same OS, you can change the port used by Informix SNMP Master Agent, for example, changing to port 5161. (off course, we need adapt the template to use the correct port) * INFORMIXSNMPPORT=5161 ./runsnmp.ksh start The output should be something like : | runsnmp.ksh FYI - Using INFORMIXDIR: /xxx/informix | runsnmp.ksh FYI - Using INFORMIXSNMPPORT = 5161 | runsnmp.ksh FYI - Setting SR_SNMP_TEST_PORT to 5161 | runsnmp.ksh FYI - Setting SR_TRAP_TEST_PORT to 162 | runsnmp.ksh FYI - Setting SR_AGT_CONF_DIR to /xxx/informix/snmp/snmpr | SNMP Research EMANATE Agent Version 22.214.171.124 | Copyright 1989-2007 SNMP Research, Inc. | runsnmp.ksh FYI - The SNMP Research Inc. master agent (snmpdm) started (pid 13107646). | runsnmp.ksh FYI - The server discovery daemon (onsrvapd) started (pid 13434922). Will be created tree LOG files (Master, srvprd, sub-agent) on /tmp (by default) : | /tmp> ls -ltr on*log *snmp* | -rw-rw-r-- 1 informix informix 1090 Jun 10 17:22 onsrvapd.517185c724026.log | -rw-rw-r-- 1 informix informix 4011 Jun 11 08:06 onsnmp.idsbkp.517185c8580f4.log | -rw------- 1 root system 9204234 Jun 13 12:10 snmpd.log If you check your PIDs with ps -fe , you should found at least 3 PIDs : snmpdm, onsrvapd and onsnmp bellow is the output on my AIX 5.3 where the snmpmibd and snmpd is the AIX SNMP service. | > ps -fe | egrep "snmp|onsrv" | root 135182 77830 0 Apr 19 - 4:35 /usr/sbin/snmpmibd | root 143414 77830 0 Apr 19 - 8:27 /usr/sbin/snmpd | informix 147494 1 0 Apr 19 - 8:54 /xxx/informix/bin/onsrvapd | root 356500 1 0 Apr 19 - 3:39 /xxx/informix/bin/snmpdm (5161) | informix 360692 147494 0 Apr 19 - 6046:38 onsnmp -nidsbkp -k5 -p5 -l/tmp -g32 -r4 * Master Agent = snmpdm * Server Discovery = onsrvapd The discovery process discovers multiple server instances running on the host. These instances might belong to different versions that are installed on different directories. Whenever a server instance is brought online, the discovery process detects it and spawns an instance of OnSNMP to monitor the database server. * Sub Agent = onsnmp -------------------------------------------------------------- How the SNMP items was discovered and included into this Template? * First I was used the Zabbix plugin SNMP Browser https://www.zabbix.com/wiki/howto/monitor/snmp/snmp_builder https://github.com/atimonin/snmpbuilder For each item showed what I have interest to monitor , I have added manually into the template. Since this plugin isn't prepared to Zabbix 2.0.5 (when I download it) I need to patch it manually and do some manual adjustments to work. After that works fine, but be careful, I lost it when I update my zabbix with the RPM manager(zypper/opensuse). * Other way I use is the smnpwalk command on Linux BOX (net-snmp RPM package), with this command I able to identify the items too. (for nice output need to copy the *V2.mib files from $INFORMIXDIR/snmp to /usr/share/snmp/mibs , this on OpenSuse 12.3, this location may vary on other Linux distribution) | $ snmpwalk -m Informix-MIB -c public -v 2c 126.96.36.199:5161 | head | SNMPv2-MIB::sysDescr.0 = STRING: AIX release:3 version:5 machine:000000000 | SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::zeroDotZero | DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (25647272) 2 days, 23:14:32.72 | SNMPv2-MIB::sysContact.0 = STRING: SNMP Research Inc., +1 (865) 573-1434, email@example.com | SNMPv2-MIB::sysName.0 = STRING: P550.xxx.corp | SNMPv2-MIB::sysLocation.0 = STRING: | SNMPv2-MIB::sysServices.0 = INTEGER: 72 | SNMPv2-MIB::snmpInPkts.0 = Counter32: 41470 | SNMPv2-MIB::snmpOutPkts.0 = Counter32: 41519 | SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0 | | $ snmpwalk -m Informix-MIB -c public -v 2c 188.8.131.52:5161 | grep -i start | RDBMS-MIB::rdbmsSrvInfoStartupTime.893002000 = STRING: 2013-4-22,12:6:39.0,+3:0 | RDBMS-MIB::rdbmsSrvParamComment.893002000."AFF_SPROC".1 = STRING: Affinity start processor | $ snmpget -m Informix-MIB -On -c public -v 2c 184.108.40.206:5161 RDBMS-MIB::rdbmsSrvInfoStartupTime.893002000 | .220.127.116.11.18.104.22.168.22.214.171.1243002000 = STRING: 2013-4-22,12:6:39.0,+3:0