What does mdev mean in ping output (last row below)?

me@callisto ~ % ping -c 1 example.org   
PING example.org ( 56(84) bytes of data.
64 bytes from 43-10.any.icann.org ( icmp_seq=1 ttl=245 time=119 ms

--- example.org ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 119.242/119.242/119.242/0.000 ms
  • 8
    mdev is the moving standard deviation, sometimes also abbreviated "MSTD". It's not possible to calculate the true standard deviation until all the data points have been collected. A moving number is calculated on known data only. – Chris S Nov 25 '11 at 2:55

It's the standard deviation, essentially an average of how far each ping RTT is from the mean RTT. The higher mdev is, the more variable the RTT is (over time).

With a high RTT variability, you will have speed issues with bulk transfers (they will take longer than is strictly speaking necessary, as the variability will eventually cause the sender to wait for ACKs) and you will have middling to poor VoIP quality.

  • 1
    Otherwise known as jitter. – dmourati Jul 29 '13 at 19:32
  • 2
    @dmourati Actually, no, the jitter is the difference between the lowest and highest RTT (or, equally, the difference from min to mean and teh difference from mean to max, depending on if you see it as "I ms" or "-A / +B ms". – Vatine Jul 30 '13 at 9:20

From the source code [1]:

                    tsum += triptime;
                    tsum2 += (long long)triptime * (long long)triptime


            tsum /= nreceived + nrepeats;
            tsum2 /= nreceived + nrepeats;
            tmdev = llsqrt(tsum2 - tsum * tsum);

we can conclude that:

mdev = SQRT(SUM(RTT*RTT) / N – (SUM(RTT)/N)^2)

which exactly matches Vatine's answer above.

  1. http://www.skbuff.net/iputils

It's the standard deviation - not sure why the label mdev has been used for it.

  • 3
    Google said that it could be mean (or median) devviation. – quanta Nov 21 '11 at 9:26
  • Okay. The ping(8) man pages does not tell me anything about deviations. What is it exactly or how should I interpret this particular value? – Daniel Nov 21 '11 at 9:37
  • 1
    @Daniel: standard deviation is a statistics concept, it tells you how the samples were distributed from the average. See en.wikipedia.org/wiki/Standard_deviation – Matteo Nov 21 '11 at 13:40

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.