I need to power 16 IP phones over their Ethernet connections. I am in the process of changing our switches and only the phones need PoE, everything else is powered by mains cables.

I have contacted the supplier of the phones and for 16 mains leads it will be close to £300. I know it's possible to get a PoE injector that goes between the mains and the phone but I would like to do this as tidily as possible and ideally in bulk.

I imagine something that looks like a switch but doesn't actually 'switch' if that makes sense. Basically I want to inject power to 16 devices at once.


You can get multiport PoE injectors, e.g. this one:


(no idea if it's good or bad, first one I found with 16 ports).

  • Is that the name of these things 'midspans'? – dannymcc Nov 24 '11 at 23:16
  • I found that one googling for: multiport PoE injector – Ward - Reinstate Monica Nov 24 '11 at 23:17
  • Ha I've been googling for about an hour and didn't come across that. Thanks! – dannymcc Nov 24 '11 at 23:20

I'd recommend a low-cost PoE switch or possibly purchasing a higher-end PoE switch/blade along with your switch refresh. The phones will be on their own network/vlan, correct? It may make sense to segregate them and provide a dedicated device (24 or 48 ports).

  • The phones are currently on the main (read: only) network. I want to upgrade the switches to support VLANS but a PoE layer 3 switch is expensive. I was thinking a midspan would allow me to upgrade the switches in years to come without worrying about PoE switch capabilities. – dannymcc Nov 24 '11 at 23:31
  • 1
    These days, if you're looking at higher-end switches, they'll often have a PoE option. If you're looking at chassis switches, that's definitely the case... But even with 1U rackmount switches, there's less of a penalty in adding PoE functionality. In my case, when I've just needed power, I'd buy a low-end PoE switch (e.g. Cisco SRW224G4P-K9-NA). – ewwhite Nov 24 '11 at 23:37
  • 2
    My last place of employment made a great deal of use out of the PowerConnect managed POE switches from Dell. They worked well for our environment and the cost difference was under $200 / switch (as compared to managed without POE) at the time. Considering the scalability it was right move. – Tim Brigham Nov 25 '11 at 0:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.