5

What is the button on power supply of the Dell Optiplex 760 workstation for? There is a small button near LED power indicatior - seems to do nothing when pressed.

Improve this question
3
  • Have you tried asking Dell support?
    – John Gardeniers
    Jun 30, 2009 at 10:57
  • is it definitely a button? There is genrally a small red slide switch on them that's used for switching between US and European voltages (Hint: don't change it) but I've not seen one with a button. What form factor is the machine - Optiplexes come in 4 different sizes...?
    – Marko Carter
    Jun 30, 2009 at 11:51
  • @Marko - yes, it's a small microswitch monostable button, right next to LED. Optiplex is a standard middle-tower.
    – tomash
    Jul 1, 2009 at 7:38

4 Answers 4

Reset to default
5

It has a green LED above it and is used to test the PSU without opening the case and testing the PSU.

I have one here in my office and I believe thats what it does.

Note that when plugged in and pressed, it fires up the PSU for just a second.

Improve this answer
1
  • When pressed and held, test ends after a few seconds too
    – tomash
    Jul 1, 2009 at 7:37
3

It's called the Built-In Self-Test (BIST) for the power supply. The BIST can be used to isolate and troubleshoot power failures throughout the system.

Here is a video from Dell about it: https://www.youtube.com/watch?v=udGOe7LQJEI

Improve this answer
2

Possibly the PSU has a circuit breaker built in as additional protection against electrocution / other electrical fun. The button would then be a reset for this circuit breaker.

Improve this answer
2
  • I've seen buttons like this before, and those were for resetting the builtin automatic fuse.
    – pauska
    Jun 30, 2009 at 19:40
  • It's true, most of the OptiPlex models have them, although some are internal. As with any circuit breaker you pull everything but the MB/CPU and reset. Adding components until you find the bad one. Usually a disk or USB device.
    – mckenzm
    Nov 14, 2017 at 2:28
-1

Is it set to 'soft off' or disabled in the BIOS. Most power buttons nowadays can be changed to set to standby instead of hard power down.

Try pressing it in for 4 seconds, that forces a full power off on all power buttons.

Improve this answer
1
  • This button has nothing to do with ACPI. It is clearly built into the PSU.
    – mckenzm
    Nov 4, 2017 at 8:23

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.