Does anyone know if the so-called ``management'' features of the NetGear GS108E switch require external software to enable these features? Specifically, the port monitoring and VLAN features. One reference I found says it is built into the switch, another says not. The download section on NetGear's site offers a Windows software download.

I ask here since the ProSafe switches are aimed at business customers.

  • How else would you enable or control those features? – David Schwartz Feb 19 '12 at 5:47
  • @DavidSchwartz - Actual managed switches usually have a web server or a console built in that allows one to manage the switch. – casualcoder Feb 19 '12 at 15:25
  • Say it had a web server, how would you access it without external software? Would you compose HTTP requests by hand? – David Schwartz Feb 19 '12 at 21:31
  • @DavidSchwartz - That would be a viable alternative. ;) – casualcoder Feb 21 '12 at 0:16

The GS108E appears to be reliant on the Prosafe Plus Configuration Utility and lacks a telnet/http server.

Here is a youtube clip of it in action http://www.youtube.com/watch?v=2RRFzyByh1U

Skip to 1:48 and you see it mentions no http/telnet.

There is a comment on this page http://www.newegg.com/Product/Product.aspx?Item=N82E16833122397 also moaning about lack of web interface.

| improve this answer | |
  • I was hoping for first person experience, but the video is clear without a doubt on the point. – casualcoder Feb 21 '12 at 0:17

Starting with the v3 model of these, they can be managed via a web interface. No need to use the ProSafe software.

See FAQ 4 here: https://kb.netgear.com/25093/GS108Ev3-FAQs

| improve this answer | |

There are two articles in the german Linux Magazin describing the insecure protocol used for accessing and configuring these switches:

First article: http://www.linux-magazin.de/Ausgaben/2012/10/Switch

Second Article with the documentation of the minimally improved "encryption" after the firmware update: http://www.linux-magazin.de/Blogs/Insecurity-Bulletin/Gastbeitrag-Security-by-Obscurity-bei-Netgear-Switches

Unfortunately, these articles have never been brought to the north american and british editions. Please use your favourite translation tool :)

| improve this answer | |

GS108E has a Web GUI but it's bugged (firmware 2.06.03 EN):

The Web GUI stops after a couple of hours ... It's not accessible anymore, only after a reboot.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.