3

We have a building with 10 individual offices.

We have a single internet connection coming in where our ISP has provided us with 10 public ip addresses.

Each office would like to have their own Linksys firewall router to manage their inbound/outbound port traffic.

Can I just put a basic switch in between the ISP service modem and the 10 individual linksys routers?

6

Yes, you can do this. You'll just want to make sure that you keep track of which router has which IP address, and of course you'll want to configure them statically to avoid your ISP providing a particular business with an IP different than what they were using.

  • 6
    A managed switch with ARP spoof prevention or similar would allow you to lock down switch ports to a particular MAC and/or IP address. – gravyface Apr 23 '12 at 17:54
5

We do exactly this. We have an 8 port Siemens switch connected to the output of our ISP's Cisco router. Each port of the switch goes to a router in a different division of the company. I labeled each router with IP info so ,that in the case of a router failure, a new router could be dropped in with minimal trouble.

  • what model number is your switch? any problems using an unmanaged switch here? – Jonathan S. Fisher Sep 19 '13 at 20:39
  • The switch is just a basic 8-port 10/100 switch. It's been running for about 3 years now with no problems at all. Didn't see the need to add complexity with a managed switch. – user76732 Mar 6 '14 at 15:00

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.