We have purchased a new server to act as a MS SQL backend. I am curious to know what the best setup would be for it.
The server is a Dell R710 it has 6 hard drives 2x 74GB 15k and 4x 146GB 15k
This is currently setup in a RAID 1/Raid10 configuraton.
My question is where(which array) the following should go?
TEMPDBs (also how many, size and growth) System DBs (master,model, etc) Application MDFs Application LDFs System Page file
OS is already installed on the RAID1.
I'd put the OS, paging file and LDF(s) on the RAID1 array. Everything else on the RAID10 array.
If you're not using Windows 2008 make sure your partitions are correctly aligned:
http://msdn.microsoft.com/en-us/library/dd758814.aspx
As already explained add 1 TEMPDB file per cpu core - make them all the same size.
Size your log files appropriately and create them in one step.
Consider backing up your databases to a different server over a network share if possible - to mitigate the risk of your array completely failing and taking your database and backups with it.
I did some research a while ago about tempdb optimization and answered my own question on Stackoverflow. Here is what I found out.
In order to optimize tempdb performance pay attention to physical disk configuration, file configuration, as well as some settings within the database.
Physical disk configuration
tempdb should reside on its own dedicated physical disks. This allows it to split I/O transactions from the remainder of volumes on the SQL Server.
To move tempdb to a new disk drive, use ALTER DATABASE. It is the key T-SQL command to perform this operation. Microsoft offers a good example in SQL Server 2005 Books Online. The article name is ALTER DATABASE (Transact-SQL) and the specific section is 'G. Moving tempdb to a new location.'
The tempdb is a very high-write database. So, a RAID 5 array isn't the proper place for it. You should put the tempdb on either a RAID 1 or RAID 10 array as they're optimized for high-write applications. If you can afford additional RAID 1 or RAID 10 arrays for each physical database file for the tempdb, you'll get increased performance.
Database files
You should have one physical file per CPU core in the server. So, if you have a dual-chip, dual-core server, you should have four physical database files for the tempdb database. When adding more database files, it's important to configure the files at the same initial size and with the same growth settings. That way, SQL Server will write the data across the files as evenly as possible.
Database file size
The size of the tempdb database can affect the performance of a system. For example, if the size that is defined for tempdb is too small, part of the system-processing load may be taken up with autogrowing tempdb to the size required to support the workload every time you restart the instance of SQL Server. You can avoid this overhead by increasing the sizes of the tempdb data and log file.
Determining the appropriate size for tempdb in a production environment depends on many factors including the existing workload and the SQL Server features that are used. Microsoft recommends that you analyze the existing workload by performing the following tasks in a SQL Server test environment:
Minimum size recommendations for tempdb are as follows:
Envir. Size DB Size (MB) Log Size (MB) ----------- ------------ ----------- Small 1024 256 Medium 5120 1024 Large 10024 2048
Database settings
You can further increase tempdb performance by disabling the auto update stats, which will save your tempdb some work. You can also set the auto create statistics option to false.
Disclaimer: Settings should be changed with care. Depending on the kind of load you place on your tempdb, changing settings could adversely impact system performance.
To achieve optimal tempdb performance, follow the guidelines and recommendations provided in Optimizing tempdb Performance.
How to monitor tempdb usage?
Running out of disk space in tempdb can cause significant disruptions in the SQL Server production environment and can prevent applications that are running from completing operations.
You can use the sys.dm_db_file_space_usage dynamic management view to monitor the disk space that is used by these features in the tempdb files. Additionally, to monitor the page allocation or deallocation activity in tempdb at the session or task level, you can use the sys.dm_db_session_space_usage and sys.dm_db_task_space_usage dynamic management views.
These views can be used to identify large queries, temporary tables, or table variables that are using lots of tempdb disk space. There are also several counters that can be used to monitor the free space that is available in tempdb and also the resources that are using tempdb.
Links:
The easy generic answer is anything that involves high IO should go onto the the RAID 10 disk group. Also have you decided your partition strategy or that part of the question?
So in you first disk group I would probably create a single partition (about 70GB usable) I would place the OS and the MSSQL application on this.
On the second I would create the following partitions
1) partition for page file (dependant on much memory you have but about 10-20GB 2) partition for transaction log files 100GB 3) partition for Datafiles 100GB
This will leave you about 50GB spare that I would leave unassigned so you can grow either the log partition or the data one into as your requirements change.
Interestingly I am currently working on the very same spec machine only I am using Linux and Oracle, are you me from parallel universe?
James
There have been some great answers so far, so I won't bother putting one up, but I'll pose a question to you.
Why didn't you ask this question before buying the server? Why are you trying to cram a system into an already purchased server instead of buying a server to fit the needs of the system?
Sorry I asked this question as an unregistered user and now can't mark it as answered. I am waiting to here back from the admins to see if they can attach my account to the question again.
To give some more insight this server will not be under huge load, its actually a source control backend. Buying a server and a DAS or a ISCSI SAN or something would have been over kill and the cost would have crushed the projects chances. I work for a SMB of about 100 people so our IT budget is tight especially right now.
@mrdenny
We did ask the questiong to the software vendor who recommened this configuration. We bought it then when we posed the quest I asked here they said to put log, databases, and tempdbs all on the raid 10 partition. I am not a big DB guy (really??) but this sounded fishy, as pretty much everyone knows not to mix your ldfs and mdfs on the same spindles.
@splattne - Thanks for the insight on tempdb's, this will come in handy for this and future SQL installs.
@SuperCoolMoss - I have talked to some people in my own IT firend network and they agree with you on this. OS, Pagefile and LDFs on RAID1 and tempdb and MDFs on RAID10
Thanks to everyone one else that commented.
From my reading these are the basic rules I think you should follow when delploying SQL when it comes to disks. In my opinion they should be followed in this order, let me know if you agree or disagree.
Please feel free to share your modified version of this list.
What amount of performance do you need? It's difficult to come up with an answer based on "here's some disk". Plus SQL performance is much better if you can shove all your data into cache, so make sure you've got plenty of RAM in that thing.
I would go for OS and pagefile on your 2x74Gb volumes. If you are getting into a situation where you have heavy log traffic, you can split your raid 10 into a pair of raid 1's and put your logs on there.
Obviously there are a lot of religious wars over the "best" layout, but you don't really have enough disks to move around. There's no point partitioning your data drives, because what you really care about is the number of spindles, and you're limited by what you can fit in the server.
You might be better off getting a PowerVault or some such, and recycling the 146Gb drives into that (along with as many other drives as will fit) and splitting that into data/logs/system+tempdb volumes.
I would start with collecting some IO statistics from the old system. For example start with the Performance Dahsboard reports: http://www.microsoft.com/downloads/details.aspx?FamilyId=1d3a4a0d-7e0c-4730-8204-e419218c1efc&displaylang=en This will give you the IO Statistics for your databases and then you can make an informed decision, rather than a 'one size fits all' generic advice. Of course the old server may have different IO characteristics per database than the new one, specially if different amount of RAM is available. Still is better than a pure guess.
Ideally one aims to separate higher load I/O files into their own devices, and also don't want to mix the random I/O of MDF access with the linear writes of the LDF access. In your case, there simply isn't really too many combination, you really only have 2 locations (the 2 disks in RAID1 and the 4 in RAID10). You can sum up the IO per database as collected from the old server and then split the file locations so it distributes the IO between the 2 destinations at a ratio of probably 1/5 on the RAID1 and 4/5 on the RAID10 (to account for the OS and page file IO on RAID1). Hope you don't have any write intensive application (high sequential LDF write load)...
TempDB layout is usually recommended to be 1 NDF per scheduler (CPU core not masked out), all having the same size, the reasoning being explained here: http://blogs.msdn.com/sqlserverstorageengine/archive/2009/01/04/managing-tempdb-in-sql-server-tempdb-configuration.aspx. This addresses page allocation contention that can be a serious issue under high load on SQL 2K, less so under 2k5, and even less on 2k8. But given that it costs basically nothing to configure it so, you should do it still.
That isn't really a very fast disk system. Full credits to splattne for an awesome answer, but really that isn't a very fast disk setup, so I'm not sure how much trouble it's worth going to.
The two disk RAID1 gives you little or no performance increase over a single unraided disk. The four disk RAID10 is giving you about the speed of a two disk RAID0, which is fast but not stunningly so. It's not a slow server, but it's not an obvious candidate for running a really demanding SQL database.
If it were my server I would find two more 146GB disks and make it a six disk RAID5. OK, I'm going to get screamed at for putting tempdb on the same spindle(s) as the data files, but the Perc controllers are very good at RAID5 and a six disk RAID5 will be so fast you'll (probably) get better performance than having tempdb on a RAID1 and only 4 disks in your RAID5. I say "probably" because as with everything it depends on how you load it.
JR
