3

The cabling between our patch panel and switches isn't a complete nightmare (like this), but is far from well organized. As we add new wall jacks, or office moves happen, cables get moved on the patch panel; in a given cable bundle, one cable may go to port 10, the other to 410.
The key problem, I think, is because we have fewer switch ports (336) than patch panel ports (480) and so can't neatly arrange and tie up the cables in groups at the patch panel end in a one to one relationship to the switches.

How can I improve the arrangement of the cables at the patch panel end when they go anywhere and everywhere? Am I missing some obvious trick here, or do I just have to lie back and think of England?

Improve this question
3
  • How many of those wall ports are needed at one time? How many cabinets is this across?
    – Andrew
    Sep 20, 2012 at 0:51
  • The patch panel is in a rack frame fixed to the floor/ceiling and hard up against a wall, so I can only run cables to one side or from the top via a cable ladder. We have cable management every fourth row. Not great, but I feel I could get it neat enough if I didn't have to move cables around at random on the patch panel end because we don't have enough switch ports to match the number of panel ports. Our utilization is relatively low; I'd say about 60% of ports are in use.
    – Chris
    Sep 20, 2012 at 12:28
  • To clarify: by "60% of ports are in use" I mean 60% of the switch ports are in active use.
    – Chris
    Sep 20, 2012 at 12:37

1 Answer 1

Reset to default
1

Divide the switches up into patch panel sections. Switch 1 may go to panel 1, switch 2 to panel 2, etc. Once you get to a situation like this, there really isn't much you can do but go in at 1am and start pulling cables, re-routing and bundling when all the routing is complete.

Having a higher count of patch panel ports may necessitate couple new switches, especially if you are finding yourself disconnecting ports here and there to accommodate a temporary connection.

Improve this answer
2
  • Cable management loop panels (aka "cable tidys") are invaluable, too - if you have the space, mount one per patch panel AND one per switch.
    – Andrew
    Sep 20, 2012 at 2:06
  • I keep a bunch of spare 0.5, 1, 2, and 3-foot patch cables in a box in the server room so you can find one that's just long enough to go from switchport to patch panel port without creating any excess. For what it's worth.
    – Tedwin
    Apr 17, 2016 at 16:46

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.