In my Fritzbox it states the following:

IPv6-Adresse: 2a02:8070:600::14b6:c7******, Gültigkeit: 100465/86065s
IPv6-Präfix:  2a02:8070:62c:3200::/56, Gültigkeit: 100464/86064s

I am not able to connect to IPv6 Addresses from computers configured by the fritzbox, because they get an address with prefix 2a02:8070:62c:3200::/56 but somehow the fritzbox does not route those addresses.

Is this because the IPv6-Address is not in the prefix range?

The address of the Fritzbox responds to pings, but my computers reached via various addresses from the prefix range do not (:

PING 2a02:8070:62c:3200:28d****(2a02:8070:62c:3200:28d****) 32 data bytes
From 2a02:8070:600:0:14b6*** icmp_seq=0 Destination unreachable: Administratively prohibited
From 2a02:8070:600:0:14b6*** icmp_seq=1 Destination unreachable: Administratively prohibited
From 2a02:8070:600:0:14b6*** icmp_seq=2 Destination unreachable: Administratively prohibited
From 2a02:8070:600:0:14b6*** icmp_seq=3 Destination unreachable: Administratively prohibited

blocked ping this is "view" from outside

From inside the ping6 looks like this:

traceroute -6 heise.de
traceroute to heise.de (2a02:2e0:3fe:100::8), 30 hops max, 80 byte packets
1  fritz.box (2a02:8070:62c:3200:****)  0.787 ms  1.424 ms  1.702 ms
2  * * *
30  * * *
  • You get 2a02:8070:600::14b6:c7****** on the link to the ISP (WAN side) and 2a02:8070:62c:3200::/56 to be used inside your own network (LAN side). That shouldn't cause the problem you are describing. Is there a way to see the routing table and the firewall settings of the Fritz!Box? – Sander Steffann Dec 8 '12 at 15:24
  • 2
    PS: good to see that Kabel Baden-Wuerttemberg GmbH is doing IPv6 :-) – Sander Steffann Dec 8 '12 at 15:25
  • no i cant find anything where i can see the routes in the fritzbox:( – kmindi Dec 8 '12 at 15:42
  • Administratively prohibited does indicate that it's a firewall blocking the traffic – Sander Steffann Dec 8 '12 at 16:23
  • yeah from outside that is ok, but from inside i cant reach to outside. – kmindi Dec 8 '12 at 16:29

My settings were all correct, it seems like it was a issue in the network of Kabel BW but I can't say because I am no operator. It just started to work again.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.