Shell Command for Getting IP Address?

Question

Is there a bash command to find the IP address for an Ubuntu box? I need to find the IP address so I can ssh into the machine later.

Answer 1

/sbin/ifconfig -a

Answer 2

You can use:

/bin/ip addr

Answer 3

If you have an internal address in use, checking

curl http://myip.dnsomatic.com

might be a good idea on unix shells.
Or, just plonk that URL into your browser.

---

If you get a different answer from the "ifconfig -a" result,
the ifconfig gave your internal address -- which will probably not work from outside.

---

Even if all seems fine, you could have a firewall in place that will disallow incoming ssh connections.
At which time you should try the port of interest from a browser on the machine at,

http://www.canyouseeme.org/

That will confirm connectivity through,

• external IP address (showing it to you on that page)
• NAT, Port Forwards
• Firewalls

Answer 4

/bin/hostname -i

Answer 5

 curl icanhazip.com

tee hee!

From http://www.commandlinefu.com/commands/view/2966/return-external-ip

Answer 6

/sbin/ifconfig|grep inet|head -1|sed 's/\:/ /'|awk '{print $3}'

If you need your internal adress append your interface after ifconfig, e.g.

 /sbin/ifconfig eth0|grep inet|head -1|sed 's/\:/ /'|awk '{print $3}'

Answer 7

If you are behind a NAT, and need the public IP, use this:

wget -q -O - checkip.dyndns.org|sed -e 's/.Current IP Address: //' -e 's/<.$//'

taken from: http://www.go2linux.org/what-is-my-public-ip-address-with-linux

Answer 8

If you have multiple interfaces, could be useful to specify which one you want IP. if you want IPV4 address of interface 'eth0':

ip addr show dev eth0 | grep "inet " | awk '{ print $2 }' 

if you want IPV6 address of interface 'eth0':

ip addr show dev eth0 | grep "inet6 " | awk '{ print $2 }' 

if you want to search for an IP between two common interfaces of a laptop, wlan0 and eth0:

CURRENT_IP=''
for INTERFACE in wlan0 eth0; do
    if [ -z $CURRENT_IP ]; then
        CURRENT_IP=$(ip addr show dev $INTERFACE | grep "inet " | awk '{ print $2 }')
    fi
done

Answer 9

If you need to find out what the IP address of your router, you could run this command.

dig +short myip.opendns.com @208.67.222.222 @208.67.220.220

If you are using OpenDNS for your dns server, you could shorten it to:

dig +short myip.opendns.com

You could also use this command.

curl http://myip.dnsomatic.com

Answer 10

Just curl this page:

$ curl wtfismyip.com/text

Answer 11

Here is a one line that works on Linux and OS X too, and it will return the first address that is not local:

ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p'

Send credits to https://stackoverflow.com/a/13322549/99834

Answer 12

LOCAL_IP=`/bin/hostname -I | sed 's/ //g'`

Answer 13

The simplest way to go about it is probably

ifconfig eth0

assuming the machine has a single IP address on the default wired interface - you might need

ifconfig wlan0

if it's on WiFi.

Answer 14

ip address show scope link

It will show you the IP address of living - has link - interfaces. But it is not a bash command. Bash has no ability to know about IP and network at all.

Answer 15

What I understand is you want to connect a remote ubuntu machine which has dynamic ip. Go dyndns.org site and open a free account. Then on the remote machine you need to install a dynamic ip tool.

sudo aptitude install dyndns-client

so you can ssh remote machine via

ssh [email protected]

So after configuration you will never need the remote machine ip address.

Answer 16

Here is what I am using:

LC_ALL=C /sbin/ifconfig | awk '
    /inet addr/ {
        gsub("addr:","");
        if(($2!="127.0.0.1") && ($2!="0.0.0.0") && ($2!=""))
            { print $2 };
    }'

Answer 17

if you need just a single IP of given interface you can do:

ifconfig eth0 | grep "inet " | awk '{gsub("addr:","",$2);  print $2 }' 

Answer 18

If you're looking for a public IP address of the box, you could use the following:

• dig @ns1.google.com -t txt o-o.myaddr.l.google.com +short | tr -d \"

You could use dig(1) options like -4 or -6 to specifically look for an IPv4 or IPv6 address; Google will provide an answer in a record of TXT type, which will have quotes around it when presented by dig; if you want to subsequently use the variable with utilities like traceroute, you gotta use something like tr(1) to remove said quotes.

Other options include whoami.akamai.net and myip.opendns.com, which answer with A and AAAA records (instead of TXT as in the above example from Google), so, they don't require having the quotes removed:

• dig -4 @ns1-1.akamaitech.net -t a whoami.akamai.net +short

• dig -4 @resolver1.opendns.com -t any myip.opendns.com +short

• dig -6 @resolver1.opendns.com -t any myip.opendns.com +short

Here's a sample script that uses all the options above to set the variables:

#!/bin/sh
IPANY="$(dig @ns1.google.com -t txt o-o.myaddr.l.google.com +short | tr -d \")"
GOOGv4="$(dig -4 @ns1.google.com -t txt o-o.myaddr.l.google.com +short | tr -d \")"
GOOGv6="$(dig -6 @ns1.google.com -t txt o-o.myaddr.l.google.com +short | tr -d \")"
AKAMv4="$(dig -4 @ns1-1.akamaitech.net -t a whoami.akamai.net +short)"
CSCOv4="$(dig -4 @resolver1.opendns.com -t a myip.opendns.com +short)"
CSCOv6="$(dig -6 @resolver1.opendns.com -t aaaa myip.opendns.com +short)"
printf '$GOOG:\t%s\t%s\t%s\n' "${IPANY}" "${GOOGv4}" "${GOOGv6}"
printf '$AKAM:\t%s\n$CSCO:\t%s\t%s\n' "${AKAMv4}" "${CSCOv4}" "${CSCOv6}"

---

If you're looking for a private IP address, or for a set of all IP addresses assigned to the box, you could use some combination of ifconfig (on BSD and GNU/Linux), ip addr (on GNU/Linux), hostname (options -i and -I on GNU/Linux) and netstat to see what's going on.