I have a Draytek 3200 router and a pfsense rackmount router that I am trying to get to route to each other.
I have a subnet on each router and a subnet for the link between, as shown here:
As it stands at the moment I can ping from the Draytek 192.168.1.0/24 subnet to 10.2.1.2/24 successfully. I can ping from 10.2.1.1 to 10.2.1.2. I can't ping from the pfsense at all to the draytek's 192.168.1.0/24 subnet.
Ultimatly I am trying to be able to ping anything on the 192.168.1.0/24 subnet from any LAN on the pfsense.
Current pfsense Interfaces
Current pfsense Gateways
Current pfsense Routes
I've allowed everything through on the firewall, as far as I can tell.
Draytek Subnet Configuration
Draytek Static Routes
I'm certain I'm missing something and it's probably obvious, but I can't for the life of me get this working.
Draytek Routing Table
Key: C - connected, S - static, R - RIP, * - default, ~ - private * 0.0.0.0/ 0.0.0.0 via 22.214.171.124 WAN1 S 10.1.1.0/ 255.255.255.0 via 10.2.1.2 LAN1 C 10.2.1.0/ 255.255.255.0 directly connected LAN4 * 126.96.36.199/ 255.255.255.255 via 188.8.131.52 WAN1 C~ 192.168.1.0/ 255.255.255.0 directly connected LAN1 S~ 192.168.2.0/ 255.255.255.0 via 184.108.40.206 VPN-3 S~ 192.168.3.0/ 255.255.255.0 via 220.127.116.11 VPN-1 S~ 192.168.4.0/ 255.255.255.0 via 18.104.22.168 VPN-5 S~ 192.168.5.0/ 255.255.255.0 via 22.214.171.124 VPN-4 S~ 192.168.6.0/ 255.255.255.0 via 126.96.36.199 LAN3 C 192.168.20.0/ 255.255.255.0 directly connected DMZ S 188.8.131.52/ 255.255.255.255 via 184.108.40.206 WAN1 C 220.127.116.11/ 255.255.255.240 directly connected LAN1
I wasn't sure if it's relevant but the two routers are not directly connected via a patch cable as the Draytek only has one true LAN port. The LAN 4 on the Draytek is tagged, passed to a switch which is set to untagged on the port the pfsense is connected to.
PFSense Firewall Log
Firewall Logs ACT IF Source Destination Prot X LAN2 10.2.1.2:80 10.2.1.1:3439 TCP:FA X LAN2 10.2.1.2:80 10.2.1.1:39437 TCP:FA X LAN2 10.2.1.2:80 10.2.1.1:39441 TCP:FA X LAN2 10.2.1.2:80 10.2.1.1:39445 TCP:FA
Core Switch VLAN Config