load balancing between 2 FTP servers

Question

I am trying to load balance ftp between 2 servers. currently 2 servers are pointed to ftp.domain.com, the second server is technically used for fault tolerance but I want to balance traffic between the 2 servers. How can I achieve this? I thought of making a simple script that would redirect users from ftp.domain to 01.ftp.domain and 02.ftp.domain etc but the problem is that FTP apps dont read pages so if a user attempts to login to ftp.domain it wont redirect them anywhere.

Answer 1

To load balance your servers you should consider both command and data channels. To load balance command channel I suggest you to use HAProxy. If you use it, you should specify in your /etc/haproxy/haproxy.cfg the following:

listen ftp-lb00
    bind IP:21
    mode tcp
    option tcplog
    balance leastconn
    server ftp-serv00 192.168.1.1:21 check
    server ftp-serv01 192.168.1.2:21 check

IP here is a public ip whereas the connection is then redirected to 192.168.1.0/24 network. You should also define NAT forwarding in your iptables. For instructions to do this you can look the accepted answer here (How can I port forward with iptables?).

To perform load balance of data channel you should run as root in terminal these commands

iptables -A POSTROUTING -s 192.168.1.1/32 -o eth1 -j SNAT --to-source IP
iptables -A POSTROUTING -s 192.168.1.2/32 -o eth1 -j SNAT --to-source IP

These settings are valid for so-called active data channel. For setup in passive data channel case and more detailed instructions, please, consult this article (http://ben.timby.com/?page_id=210).