In a LAN if I traceroute the IP address of any other machine, it gets it in one hop <1 ms.
However, there is one machine, which if I traceroute, it exits the private network, goes out through external IP adresses, until it stops because of a timeout.
A mail server runs on that machine and it's working properly, if this information is of any help.
What can be the cause of such a strange behavior?
===========================================================================
Aktive Routen:
Netzwerkziel Netzwerkmaske Gateway Schnittstelle Anzahl
0.0.0.0 0.0.0.0 192.168.1.10 192.168.1.148 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.1.0 255.255.255.0 192.168.1.148 192.168.1.148 20
192.168.1.148 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.148 192.168.1.148 20
224.0.0.0 240.0.0.0 192.168.1.148 192.168.1.148 20
255.255.255.255 255.255.255.255 192.168.1.148 192.168.1.148 1
Standardgateway: 192.168.1.10
traceroute
output and routing table of host from which you're tracerouting.it is completely normal and can happen due to <short explanation>
orsomething like this shouldn't normally happen
. Please tell me why such personal information is necessary, like my MAC Adress, or my network provider (which is visible in thetracert
output) and such my current location, external IP Adress, etc. I can, however, post the route list of my routing table if you find it useful.xxx
. Commands output may lit a little light on the problem.