I have a software raid configured (/dev/md2) which has assigned the partitions sda3 and sdb3 from two 3TB disks (sda and sdb). The partition types are GPT not LVM and file system is ext4. Now, the root partition is taking 1TB and the home partition (sda4 and sdb4 on raid /dev/md3) is taking 1.8TB, I wanted to resize the root partition to take only 250GB and assign the free space to the home partition, so that it ends up being 250GB for root in md2, and 2.5TB for home. For doing this, I read that using mdadm and resizing the array volume would achieve that, but the problem is that it only resized the md2 device, but the free space in sda3 and sdb3 is unused, and I have no way to assign it to sda4 and sdb4 so I can use that extra space in md3, so I have:
At the beginning: /dev/md2 with ext4, mounting / with quota of 1000GB sda3: 1000GB with ext4 using the full 1000GB sdb3: 1000GB with ext4 using the full 1000GB /dev/md3 with ext4, mounting /home with quota of 1800GB sda4: 1800GB with ext4 using the full 1800GB sdb4: 1800GB with ext4 using the full 1800GB I want: /dev/md2 with ext4, mounting / with quota of 250GB sda3: 250GB with ext4 using the full 250GB sdb3: 250GB with ext4 using the full 250GB /dev/md3 with ext4, mounting /home with quota of 2550GB sda4: 2550GB with ext4 using the full 2550GB sdb4: 2550GB with ext4 using the full 2550GB And ended up with: /dev/md2 with ext4, mounting / with quota of 250GB sda3: 1000GB with ext4 using only 250GB sdb3: 1000GB with ext4 using only 250GB /dev/md3 with ext4, mounting /home with quota of 1800GB sda4: 1800GB with ext4 using the full 1800GB sdb4: 1800GB with ext4 using the full 1800GB
To achieve this, I followed the instructions in this website: http://www.howtoforge.com/how-to-resize-raid-partitions-shrink-and-grow-software-raid
So, I restarted in rescue mode, and ran the following commands as root:
#configure everything to edit the raid devices modprobe linear modprobe multipath modprobe raid0 modprobe raid1 modprobe raid5 modprobe raid6 modprobe raid10 cp /etc/mdadm/mdadm.conf /etc/mdadm/mdadm.conf_orig mdadm --examine --scan >> /etc/mdadm/mdadm.conf mdadm -A --scan ### Shrink md2 from 1000GB to 250GB #check the raid disk e2fsck -f /dev/md2 #resize the file system from 1000GB to 245GB to leave room for the partition to shrink without issues resize2fs /dev/md2 245G #resize the partition from 1000GB to 250GB mdadm --grow /dev/md2 --size=262144000 #resize the file system to fit the whole 250GB resize2fs /dev/md2 #do a disk check again e2fsck -f /dev/md2 ### Grow md3 to include md2 750GB free space #grow md3 to the max free space mdadm --grow /dev/md3 --size=max #run a disk check e2fsck -f /dev/md3 #resize the file system resize2fs /dev/md3 #check the file system again e2fsck -f /dev/md3
But then it turns out that for actually achieving the resize, I need to fail and remove the partitions from the raid device, repartition each disk, add back to the raid device and sync.
So I tried instructions from this web site: http://www.zedt.eu/tech/linux/resize-grow-mdadm-raid1-device/
And also tried from this serverfault answer: How to resize two RAID-1 partitions?
I've tried doing all that, resize with parted, but nothing, parted sends errors stating that it doesn't recognize the file system of the partition, I've read somewhere else that parted doesn't support ext4 but I don't care, I already resized the file system using resize2fs, so all I need to do is resize the partition. Also on some samples, I see parted print output to print file system type and all, but when I print mine, I don't get any of that information: sda and sdb disk output:
Number Start End Size File system Name Flags 5 1049kB 2097kB 1049kB bios_grub 1 2097kB 12.9GB 12.9GB raid 2 12.9GB 13.4GB 537MB raid 3 13.4GB 1113GB 1100GB raid 4 1113GB 3001GB 1888GB raid
As you can see, I get no info on file system or name, and I get errors if I want to resize partition 3 (sda3 and sdb3), and likewise I cannot grow partition 4 to acommodate the free space.
Can anyone help me on how can I resize my disks so that my raid devices can take the full space?