As the title already states, I have a problem getting DHCPd working on the Cisco ASA5505 version 7.2 with ADSM 5.2 with the basic license. Its an older one I know, and every time I tend to forget how this machine works.
Anyway, I have 3 VLAN's outside/inside/dmz. inside to outside and vice versa is working and I have setup all necessary NAT and ACL entries 6 months ago and it works like a charm. However, for some reason I can't get the DMZ to work. I have used the packed tracer to figure out if I could access anything on the outside from the DMZ network, and that just seems to be working. But DHCP broadcast packets are dropped!
I'm using the DHCP server on the ASA and what I don't get is that when I enable this server, it doesn't work right away, but instead I need to open ACL entries (i think) allowing the DMZ interface to receive bootpc and bootps packets. The question is how?
The problem is that a broadcast doesn't have a destination per se, except of course the subnet its broadcasting on; lets say 192.168.50.0/24. But doing so, doesn't change a thing and packets are still dropped....