0

I have 2*1000GB hard drives + 60GB SSD. When I'm running df -H I'm getting "wrong" information about the server's hard drives. The output

# df -H
Filesystem             Size   Used  Avail Use% Mounted on
/dev/md1                78G    48G    26G  66% /
tmpfs                  4.2G      0   4.2G   0% /dev/shm
/dev/md0               520M    46M   448M  10% /boot

Thanks!

closed as unclear what you're asking by Wesley, mdpc, voretaq7 Dec 11 '13 at 23:00

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.

  • 1
    What does fdisk -l report? – skohrs Dec 11 '13 at 20:54
  • What makes you think the output is "wrong"? What output are you expecting? How does what you see differ from what you expected? – voretaq7 Dec 11 '13 at 23:00
2

df is for filesystems, not disks. As skohrs says, you'll want to use something like fdisk to deal with disks directly.

1

It would appear that you don't have your 2*1TB HDDs mounted anywhere. The only disk being shown is a MDRaid device of ~80 GB, presumably on your 80 (not 60) GB SSD.

To get your larger disks to appear, simply (format, if necessary, and) mount them.

Not the answer you're looking for? Browse other questions tagged or ask your own question.