2

I've scoured the internet, but nobody seems to be able to decide whether RJ45 sockets should go with the release catch facing up or down.

For instance, Netgear has their ports this way:

Netgear Switch

But Cisco has their ports the other way:

Cisco

So which is right, or does it not really matter?

Edit:

I should have made myself more clear. I am asking this because I am designing a piece of hardware with a single row of Ethernet sockets, and given the variety of port configurations on the market I thought it best to get an expert opinion.

5
  • 3
    This question appears to be off-topic because REALLY???!!!!
    – Sven
    May 4, 2014 at 14:51
  • 4
    Come on people, if we can have a highly-voted question about mounting a switch upside down, we can have a question about upside down switch ports too. May 5, 2014 at 12:34
  • @HopelessN00bGeniusofnetwork No, this is terrible.
    – ewwhite
    May 5, 2014 at 13:31
  • @ewwhite I'm not saying it's not terrible, I'm just saying that we have a question that's very close to the "great question" watermark about mounting a whole switch upside down. A question about the right orientation of a switch port (or if it matters at all) doesn't seem much worse than that. May 5, 2014 at 13:51
  • I agree the question was bad, but what I meant was if you had a single Ethernet port on any piece of equipment, which way is the "correct" way up.
    – Alfo
    May 5, 2014 at 20:08

4 Answers 4

11

The preferred way for a single port would be:

Pins on the top (clip on the bottom), so dust can't settle on them.

1
  • 3
    +1 While the TIA 8P8C connector officially does not have an orientation, the IEC RJ-45 that it's based on does, ^this^ and for the reason listed.
    – Chris S
    May 5, 2014 at 13:21
9

The standard is both directions, because most (non-consumer-grade) switches in 2014 have two rows of ports per unit or blade:

enter image description here

3
  • This question wasn't about switches. If I asked you which way up a USB port goes, it would be an obvious answer because they are only ever one way up. But a variety of consumer and professional pieces of equipment with a single row of Ethernet sockets have them in different orientations.
    – Alfo
    May 5, 2014 at 20:05
  • @Alfo Actually, USB can be even more confusing :) Haven't you ever heard of the USB superposition?
    – ewwhite
    May 5, 2014 at 20:16
  • @Alfo, try telling Samsung that! I have a 971P at home... Jun 2, 2014 at 6:38
5

It does matter if there are two rows of switch ports. Then two rows are usually facing in opposite directions, such that the connectors are easier to handle:

16 port switch

The same does not really apply to switches with only one row of ports. I have been looking on all the switches I have with only one row, and every one of them has the same orientation as on the Cisco switch you mentioned, that even includes one Netgear switch.

On computers they tend to have the opposite orientation, like on the Netgear switch you mentioned.

The Cisco switch in your image looks like the ports may have that orientation because they want to use the same design all the way from 12 to 48 ports.

2
  • With two rows, there would be no way to extract the cables if any other orientation was used :)
    – ewwhite
    May 4, 2014 at 11:57
  • 4
    @ewwhite - that's what a flat blades screwdriver is for. Or a pocket knife. :) I've actually had to do this to release the tab on some poorly-designed devices before.
    – EEAA
    May 4, 2014 at 12:36
1

The choice often has to do with the orientation of the connectors used and their position on he printed circuit board. Equipment manufacturers have to purchase the socket modules that are already available.

Ergonomics will come into the question, but not necessarily as a primary criterion.

Sometimes, if the device is part of a family with some units fitted into larger chassis, then the orientation in the product line will determine the packaging, leaving an individual product less than optimal.

In some of the consumer equipment, the orientation changes over time suggesting commercial drivers.

Not the answer you're looking for? Browse other questions tagged .