2

I'm facing UDP packet receive errors (under Linux 'netstat -su' command).

I have 10 x UDP processes running on Machine-A (RHEL 5.2) and each of them send 290-byte packet at 50 times per second to the same address and same UDP port. On the recipient end (Machine-B RHEL5.2), I have a process that listens to this UDP port. Also, at Machine-B, I run 'netstat -su' to check for UDP packet errors.

I read that I need to configure my Machine-B Linux sysctl and I did the following for the above test:

   net.core.rmem_max = 33554432
   net.core.netdev_max_backlog = 2000

Also, I have changed my MTU size for both interfaces in Machine-A and Machine-B to 1380.

With all the above, I still encountered UDP packet receive errors increasing (under netstat)

How come? Anything else I need to configure?

By the way, I also tried net.core.rmem_max = 131071, but still facing packet receive errors :(

2

net.core.rmem_max is the maximum value that can be set. However, there is also a default value called net.core.rmem_default - I'd increase this one too.

Also you have to tune your application's buffer settings. Often people try to tune the kernel settings but not forget on application's ones.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.