5

I have a server (actually used as workstation) with a Supermicro X8DA6 motherboard, with 2 installed Intel X5650 processors. It uses ECC RAM.

It currently has 6 Kingston KVR1333D3D8R9S/4GHB dimms installed in 6 of its 12 memory slots (3 per processor).

I'd like now to upgrade the memory ammount. Is it safe to buy another 6 dimms of RAM to use the remaining slots if they are of bigger capacity? For example, these Kingston KVR13R9D4/16 model, which would leave me with a configuration of 6 x 4GB + 6 x 16GB.

Both models are 1.5v, which I understand is a must. Please correct me if I'm wrong.

Even if that can work, can I expect it to work at its fullest? (e.g. not to cause issues with performance vs having all dimms identical)

Thanks in advance for any comments!

migrated from superuser.com Nov 11 '14 at 10:03

This question came from our site for computer enthusiasts and power users.

  • 1
    It should just work, assuming the bigger ones do not exceed the max ranks used. – Hennes Nov 10 '14 at 21:58
8

The general answer is "yes", but you need to be careful. The issue is not so much in mixing different sizes of RAM (I was doing that here for a while on a very similar motherboard), but with other properties of the RAM.

Your motherboard manual (you can download that from SuperMicro here if you don't have it) has a table showing the limitations. The table you want is on page 2-9. "1.5V RDIMM Population for the Motherboard w/5600 Processors Installed"

Your system has 3 channels per CPU socket, and two slots per channel. You presently have one slot in each channel occupied. Your existing RAM is 1333 MHz, so you are in the top row of the table. To use that RAM with two slots filled per channel will put you in row three of the table, which limits you to single-rank or dual-rank RAM. Your existing RAM is dual-rank (DR). If you go to quad-rank, your RAM speed will drop to 800 MHz (row 4).

I can't see from the spec sheet how many ranks the RAM you want to add has, so there is a question there, esp since denser DIMMs tend to have more ranks. Even the 16 GB modules by themselves, if quad-rank, would slow your RAM speeds to 1066 MHz. Numerous tests have shown that memory clock rate is nowhere near as important as it would seem to be for performance, but if you're after ultimate performance, it's something to think about.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.