0

I have an IBM BladeCenter S, and I have added two new 450GB SAS disks.

I want to configure the disks as a RAID 0, and assign the new disks to one of the servers in the Bladecenter.

When I connect to the SAS Controller Module using the webclient, there are no options for setting up the RAID, only: "Health and monitoring" and "Configuration" (Zoning)

Please tell me how to configure my SAS disks. Is that possible using the web interface? When I log into the Adv. Mgmt. Module, \MM Control \ License Mgr: Three options:

  • IBM Bladecenter Open Fabric Manager
  • IBM Bladecenter Adv. Open Fabric Manager
  • IBM Bladecenter Open Fabric Manager plugin

Status for all these are "No license". Is it required to have a license for conf. the RAID. This is strange, since the Bladecenter have been running for five years.

Improve this question

1 Answer 1

Reset to default
0

if I'm not mistaken, you have to configure it from the BladeServer itself, not from its module.

Improve this answer

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .