5

I have problem to create bridge on vlan on teaming. Why I do something like that? - Kvm needs bridge - Vlans because I need vm’s in different subnets - Teaming in option active-backup (small HA)

I do it on centos 7 x64, with NetworkManager. Two physical interfaces:

TYPE=Ethernet
DEFROUTE=no
PEERDNS=no
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=no
IPV6_DEFROUTE=no
IPV6_PEERDNS=no
IPV6_PEERROUTES=no
IPV6_FAILURE_FATAL=no
NAME=enp8s0f0
UUID=311d4881-f3f1-45af-b01f-b48872b00b0f
ONBOOT=yes

TYPE=Ethernet
DEFROUTE=no
PEERDNS=no
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=no
IPV6_DEFROUTE=no
IPV6_PEERDNS=no
IPV6_PEERROUTES=no
IPV6_FAILURE_FATAL=no
NAME=enp8s0f1
UUID=eb43a315-b9e7-42fb-ab52-97e09a162825
ONBOOT=yes

My steps:

nmcli con add con-name team0 ifname team0 type team config '{"runner": {"name": "activebackup"}}'
nmcli con add con-name team0-port1 ifname enp8s0f0 type team-slave master team0
nmcli con add con-name team0-port2 ifname enp8s0f1 type team-slave master team0
nmcli con up team0-port2
nmcli con up team0-port1

After that I have:

NAME         UUID                                  TYPE            DEVICE
virbr0       f8b30bd2-0d92-43af-9b3d-f68c63d6822b  bridge          virbr0
team0        19542d40-dce1-4328-9b64-f44f2fd7f1fb  team            team0
team0-port2  301b2003-18d0-4186-992a-fbc758bb1c7a  802-3-ethernet  enp8s0f1
team0-port1  cafb8b30-60fc-475f-890d-0dc1191bc583  802-3-ethernet  enp8s0f0

When I assign IP to team0, I can ping from this interface gateway. Next I create vlan and bridge:

nmcli con add con-name vlan24-team0 type vlan id 24 dev team0
nmcli con add con-name br24 type bridge ifname vibr24 stp yes
nmcli con add con-name br24-vlan24 type bridge-slave ifname team0.24 master vibr24

nmcli con show:

NAME          UUID                                  TYPE            DEVICE
virbr0        f8b30bd2-0d92-43af-9b3d-f68c63d6822b  bridge          virbr0
team0         19542d40-dce1-4328-9b64-f44f2fd7f1fb  team            team0
enp8s0f0      311d4881-f3f1-45af-b01f-b48872b00b0f  802-3-ethernet  --
enp8s0f1      eb43a315-b9e7-42fb-ab52-97e09a162825  802-3-ethernet  --
br24-vlan24   16fd96b7-10b0-42b6-88e6-38749b33f816  802-3-ethernet  --
br24          667cc267-3726-42cb-a5aa-0a2011167021  bridge          vibr24
vlan24-team0  8ec83969-254b-4f75-8bad-983bac7e1af0  vlan            team0.24
team0-port2   301b2003-18d0-4186-992a-fbc758bb1c7a  802-3-ethernet  enp8s0f1
team0-port1   cafb8b30-60fc-475f-890d-0dc1191bc583  802-3-ethernet  enp8s0f0

ip a:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
6: enp8s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master team0 state UP qlen 1000
    link/ether 00:1b:21:79:55:4f brd ff:ff:ff:ff:ff:ff
7: enp8s0f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master team0 state UP qlen 1000
    link/ether 00:1b:21:79:55:4f brd ff:ff:ff:ff:ff:ff
8: team0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether 00:1b:21:79:55:4f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::21b:21ff:fe79:554f/64 scope link
       valid_lft forever preferred_lft forever
9: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
    link/ether 66:0e:c8:c8:9c:37 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
10: team0.24@team0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether 00:1b:21:79:55:4f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::21b:21ff:fe79:554f/64 scope link
       valid_lft forever preferred_lft forever
11: vibr24: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN
    link/ether ca:88:56:46:e5:18 brd ff:ff:ff:ff:ff:ff

nmcli con up br24-vlan24
Error: no device found for connection 'br24-vlan24'.

nmcli con up br24
Error: Device 'vibr24' is waiting for slaves before proceeding with activation.

teaming works fine, and I think there is problem to map bridge to vlan because interface vibr24 is down, and br24-vlan24 doesn’t map to device vlan24-team0. But I do it first time and maybe I miss something

VLAN=yes
TYPE=Vlan
PHYSDEV=team0
VLAN_ID=24
REORDER_HDR=0
BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=vlan24-team0
UUID=8ec83969-254b-4f75-8bad-983bac7e1af0
ONBOOT=yes

TYPE=Ethernet
NAME=br24-vlan24
UUID=16fd96b7-10b0-42b6-88e6-38749b33f816
DEVICE=team0.24
ONBOOT=yes
BRIDGE=vibr24

DEVICE=vibr24
STP=yes
BRIDGING_OPTS=priority=32768
TYPE=Bridge
BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=br24
UUID=667cc267-3726-42cb-a5aa-0a2011167021
ONBOOT=yes

On the other site of link i have cisco switch and configured port-channel with trunk. This are all steps which i made, anyone can help me with that?

2
+50

I am not familiar with NetworkManager. Personally I prefer "old-fashioned" direct approach with iproute2/brctl/vconfig tools. But I've found this bug report & errata: https://bugzilla.redhat.com/show_bug.cgi?id=1183420 which are very related to your problem. You are just having issue with adding VLAN to a bridge instead of bond interface like there. But a workaround from that bug report will work too.

Instead of adding br24-vlan24 (which will fail because you already have team0.24 device associated with vlan24-team connection!), you must edit vlan24-team0 properties to make it slave to virb24.

I've tried to reproduce a configuration similar to yours. But without teaming, because seems like you don't have issues with that part as you can ping from team0. I've created a bridge br24 and vlan id 24 on my NIC enp2s0. The link above suggests then to modify bonding (VLAN in our case) connection like like this:

# nmcli c mod bond-bond0 connection.master br0
# nmcli c mod bond-bond0 connection.slave-type bridge

But this failed for me on Linux Mint with following error:

$ nmcli c mod vlan24-enp2s0 connection.master vibr24
    Error: Failed to modify connection 'vlan24-enp2s0': connection.slave-type: Cannot set 'master' without 'slave-type'
$ nmcli c mod vlan24-enp2s0 connection.slave-type bridge
    Error: Failed to modify connection 'vlan24-enp2s0': connection.master: Slave connections need a valid 'master' property

But setting both properties at the same command worked:

$ nmcli c mod vlan24-enp2s0 connection.slave-type bridge connection.master vibr24
$ nmcli con up br24
Connection successfully activated (master waiting for slaves) (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/50)
$ nmcli con show
NAME                    UUID                                  TYPE            DEVICE    
br24                    502643a8-1fbd-4881-9251-7bf1599bf05f  bridge          vibr24    
vlan24-enp2s0           70cb4491-0cfb-4f5c-a0b2-9cee71eb115a  vlan            enp2s0.24 
Connection 1  1e65cdef-c819-3c30-8fc8-23f4d13f7fe1  802-3-ethernet  enp2s0   

Checking this with brctl to confirm the VLAN is up & bound to bridge:

$ brctl show
bridge name     bridge id               STP enabled     interfaces
vibr24          8000.cafedefaced0       yes             enp2s0.24

So adapting this for your configuration, this one should work for you:

nmcli con add con-name vlan24-team0 type vlan id 24 dev team0
nmcli con add con-name br24 type bridge ifname vibr24 stp yes
nmcli con mod vlan24-team0 connection.slave-type bridge connection.master vibr24

PS: Just noticed this question are actually from 2015 and was bumped due to bounty by other user. Still my answer solves this issue, as I did reproduced this situation and had the same "No suitable device found for this connection." issue as OP before I've tried this solution.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.