Just as the title states. The website is not reachable from outside our network, and random computers inside the building timeout for a couple minutes and then are back up.
For the computers inside here, using the IP address gets them access to the site even when using the domain times out.
I've tried calling our DNS provider and they said that the problem lies somewhere in the server, not them. My IT manager tells me that it's not a firewall issue. These both lead me to believe there is something in one of the configuration files that is wrong, but I don't have enough experience with this stuff to play around safely without possibly taking everything down.
Here is some information, if you need to see anything else please just ask..
# The primary network interface iface eth0 inet static address 10.0.1.15 netmask 255.0.0.0 broadcast 10.255.255.255 gateway 10.0.0.1 network 10.0.0.0
nameserver 10.0.1.3 nameserver 22.214.171.124 nameserver 10.0.1.4 nameserver 126.96.36.199
127.0.0.1 localhost 127.0.1.1 TPSWEB # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters 10.0.1.7 git.toolplas.com 10.0.1.15 toolplas.com
Not sure what other information could be useful, and a lot of the stuff in here I'm not sure what it means. So like I said if there's anything else you need just let me know.
Also, something I found weird, when i do
wget -qO - icanhazip.com it returns the IP 188.8.131.52. But when I do
nslookup new.toolplas.com it returns 184.108.40.206. Not sure if this is related or not..
Also, when I try to SSH in from outside the network I get:
ssh: connect to host new.toolplas.com port 22: No route to host
EDIT:Still reading, trying to gather as much information as possible..
Starting Nmap 5.00 ( http://nmap.org ) at 2015-05-08 13:20 EDT Interesting ports on toolplas.com (10.0.1.15): Not shown: 991 closed ports PORT STATE SERVICE 21/tcp open ftp 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 8010/tcp open xmpp 10000/tcp open snet-sensor-mgmt
iptables -L -n:
Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination
Please, any help would really be appreciated.. Thanks