1

I have an hp proliant DL360 G6 server that was 1 year stopped.. I turned it on last week and it was working just fine. So i left it working during the weekend. On Monday when i returned i notice that it was on suspension mode. I tried to bring it back to life but no results. So i turned it off by pressing the button, when i turned it on again it wont boot and no post. I only gives me a long beep continuosly. I have changed the memorys, processor and fans are runing fine. The internal leds on MB are all green but i have a blinking green led next to the memory slots 1. On front the power button led is green but the health led is blinking red. Note: I have changed the hard disks when i turned it on the first time one year and it was working perfectly fine.

Improve this question
6
  • I've logged in into ILO and it shows me everything is running ok, but i don't know exactly what to look for on there!! Any help please.
    – Neil
    May 19, 2015 at 11:39
  • Please examine the ILO log and the IML log. The server will tell you exactly what's wrong.
    – ewwhite
    May 19, 2015 at 12:09
  • Done that. IML shows me:Repaired Environment 05/14/2015 12:03 05/14/2015 12:03 1 System Fans Not Redundant (Location System) Repaired Environment 05/14/2015 12:03 05/14/2015 12:03 1 Fan Failure (Fan 4, Location System) Repaired Environment 05/14/2015 12:03 05/14/2015 12:03 1 System Fans Not Redundant (Location System) Repaired Environment 05/14/2015 12:03 05/14/2015 12:03 1 Fan Failure (Fan 4, Location System) Repaired Environment 05/14/2015 12:03 05/14/2015 12:01 1 System Fans Not Redundant (Location System) Repaired Environment 05/14/2015 12:03 05/14/2015 12:01 1
    – Neil
    May 19, 2015 at 13:09
  • and ILO log shows me:Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Caution iLO 2 [NOT SET] [NOT SET] 1 Power restored to iLO 2. Informational iLO 2 05/18/2015 01:07 05/18/2015 01:07 1 Server power removed. Informational iLO 2 05/14/2015 05:15 05/14/2015 05:15 1 On-board clock set; was previously [NOT SET] what am i missing?
    – Neil
    May 19, 2015 at 13:10
  • 1
    @Neil: Please edit this into your question while using the formatting tools to make it actually readable.
    – Sven
    May 19, 2015 at 14:49

1 Answer 1

Reset to default
2

Please examine the ILO log and the IML log. The server will tell you exactly what's wrong.

enter image description here

enter image description here

But really, I wonder if you may have caused another issue while swapping components looking for a solution. If you're seeing an error on a particular DIMM slot, there may actually be a problem with the CPU socket for the processor associated with that memory bank.

Inspect the LGA socket for bent pins.

Short of that, there is a very well-known troubleshooting process for these servers. Try following the decision tree in this link and see if it helps the process.

You can also just call HP directly for help.

Improve this answer
4
  • i just started swapping components yesterday (Monday) when i noticed the server was faulty. This means that when entered to this condition i wasn't present. So i think it should be another thing.
    – Neil
    May 19, 2015 at 13:50
  • @Neil If you're not using a troubleshooting method like noted above, I recommend that you call HP for support.
    – ewwhite
    May 19, 2015 at 14:12
  • I used the troubleshooting method with no results. I will contact hp, thanks for your help.
    – Neil
    May 19, 2015 at 14:41
  • Call HP for support.
    – ewwhite
    May 19, 2015 at 14:41

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .