6

I'm looking for a utility to monitor my RAID 5 setup, the card is a Dell PERC H700 with the following chipset:

[root@example.net ~]# lspci -v|grep LSI
03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)

The server is a Dell R710. I've been looking around the web but I haven't found concise information yet.

Thanks in advance.

7

You can use MegaRAID tool provide by LSI.

See: http://hwraid.le-vert.net/wiki/LSIMegaRAIDSAS

0
4

You can use the Dell OpenManage Server Administrator to monitor your PERC and the rest of your Dell hardware

http://www.dell.com/support/article/us/en/04/SLN266151?c=us&l=en&s=bsd&cs=04

0
3

I managed to install Dell's OpenManage (OMSA) doing the following steps as root:

1.- Install Dell's repos:

# wget -q -O - https://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash

2.- Install all needed RPMs:

# yum install srvadmin-all

3.- Updated everything (just in case):

#yum update

4.- Start services and enable them at boot up:

# /opt/dell/srvadmin/sbin/srvadmin-services.sh start
 Starting Systems Management Device Drivers:
 Starting dell_rbu:                                         [  OK  ]
 Starting ipmi driver:                                      [  OK  ]
 Starting Systems Management Data Engine:
 Starting dsm_sa_datamgrd:                                  [  OK  ]
 Starting dsm_sa_eventmgrd:                                 [  OK  ]
 Starting DSM SA Shared Services:                           [  OK  ]

 Starting DSM SA Connection Service:                        [  OK  ]

# /opt/dell/srvadmin/sbin/srvadmin-services.sh enable 
 racsvc             0:off   1:off   2:on    3:on    4:on    5:on    6:off
 instsvcdrv         0:on    1:off   2:off   3:on    4:on    5:on    6:on
 dataeng            0:off   1:off   2:off   3:on    4:on    5:on    6:off
 dsm_om_shrsvc      0:off   1:off   2:off   3:on    4:on    5:on    6:off
 dsm_om_connsvc     0:off   1:off   2:off   3:on    4:on    5:on    6:off
 ipmi               0:off   1:off   2:off   3:off   4:off   5:off   6:off

5.-Open port 1311

#iptables -I INPUT -p tcp --dport 1311 -j ACCEPT //inserts a rule on top
#service iptables save
#service iptables restart

6.- Go to: https://sample.test.com:1311

7.- If you get encryption errors:

Server has a weak ephemeral Diffie-Hellman public key

Temporarily downgrade your encryption requirements. For Firefox, type about:config in the URL and set security.ssl3.dhe_rsa_aes_128_sha and security.ssl3.dhe_rsa_aes_256_sha to false, login and go to Preferences>General Settings and set SSL Encryption to Auto Negotiate. Now, it works like a charm in other browsers.

Thank you all for pointing me to the right direction.

EDIT: Works on CentOS Linux release 7.3.1611 (Core) too, open ports in step 5 accordingly.

1

I have a PERC H700 installed in a Dell R715 server, running CentOS7. This is what finally worked for me. The key reference was this site. Specifically, the procedure I followed was:

wget –no-check-certificate https://ginernet.com/downloads/MegaCli-8.07.14-1.noarch.rpm
rpm -Uvh MegaCli-8.07.14-1.noarch.rpm

alias megacli='/opt/MegaRAID/MegaCli/MegaCli64'  ## note: you may want to make this a permanent alias by adding to .bashrc

yum install sg3_utils

After this, I was able to get the MegaRAID Client working. But, I needed to operate as the root user in order to do anything useful or get any useful information:

sudo -s

(simply preceding these commands with sudo didn't work)

Finally then, I was able to start doing useful things with the controller. E.g. to get info about the current RAID configuration:

megacli -LDInfo -Lall -a0

See if autorebuild is enabled:

megacli -AdpAutoRbld -Dsply -a0

etc.

The sites here and here have a variety of lists of useful commands.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.