I'm new to Azure and trying to use VPN to connect a single machine here to a VM on Azure. The VM is on the newer Resource Manager platform. Unfortunately, only the classic platform supports point-to-site. So I added a classic network and connected both networks with a site-to-site VPN.
VNet1 (Resource) - 10.0.0.0/23
VNet2 (Classic) - 10.0.10.0/23
The VNet2 Gateway also has point-to-site enabled. Point-to-site IP range is 192.168.0.0/24.
I downloaded the VPN client on my machine here and connected to the VPN. I'm assigned 192.168.0.5.
VPN Connection Successful Image (sorry, I can't post the image directly)
All VPN connections appear to be working, but I cannot see machines on VNet1 from here. A ping/tracert to 10.0.0.4 times out.
One article I found referenced the need for adding a line to the routes.txt for the VPN connection. The first line was already there, I added the second one and re-connected the VPN.
ADD 10.0.10.0 MASK 255.255.254.0 default METRIC default IF default
ADD 10.0.0.0 MASK 255.255.254.0 default METRIC default IF default
No luck. I checked the route table and the 10.0.0.0 routing is in there.
IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric <snip> 10.0.0.0 255.255.254.0 On-link 192.168.0.7 28 10.0.1.255 255.255.255.255 On-link 192.168.0.7 266 10.0.10.0 255.255.254.0 On-link 192.168.0.7 28 10.0.11.255 255.255.255.255 On-link 192.168.0.7 266 <snip>
What am I missing?