I'm closing in on purchasing a Dell PowerEdge R710 rack server and am curious to know the difference between Dell's power saving bios setting and their performance bios setting. Should I be concerned about choosing the power saving setting? I'll be using this rack for terminal services and definitely want performance when performance is needed. That being said, for the other 3/4's of the day when employees have gone home I'd prefer it if this server wasn't running at 110%.

Thanks in advance.


I don't know the details but the R710 has a BIOS Power/Performance options page. In it you can select to turn on and off features which will either save power and boost performance.

You can change these settings so I wouldn't worry about it.

  • That said, I think it's really awesome that dell offers this option rather than just shipping the random collection of arbitrary bios settings most vendors seem to use. – mattdm Dec 4 '10 at 3:55
  • This is useful information, but doesn't answer the question. – Wouter Mar 11 '15 at 12:34

The following Dell Whitepaper goes in depth on the differences between the different power profiles: http://en.community.dell.com/techcenter/extras/m/white_papers/20248740 (page 20-36)

Below you can find some relevant pieces of information mentioned in the whitepaper:

Each profile simply enables/disables some BIOS features, the table below provides an overview of the features. This is documentation for 12th generation servers, while the R710 is 11th generation. But I'm quite sure DAPC (Dell Active Power Controller) is similar to what Power saving mode is in the 11th generation servers, but can't confirm.

System performance profiles

It goes in depth on the different profiles.

Performance-per-watt (DAPC) profile is the default, and represents an excellent mix of performance balanced with power consumption reduction. Dell Active Power Control (or DAPC), relies on a BIOS-centric power control mechanism which offers excellent power efficiency advantages with minimal performance impact in most environments, and is the CPU Power Management choice for this overall System Profile.

Performance-per-watt (OS), otherwise known as “OS Control”, is similar to the DAPC profile for all sub-options except for the CPU Power Management. The power management scheme used for this profile is called “OS DBPM”, which allows the Operating System to manipulate processor frequencies for higher power efficiency. However, the effectiveness of this profile for reducing overall system power consumption is based on how well the Operating System is able to effectively control hardware resources, so the impacts are mixed across all supported Operating Systems.

Performance profile provides potentially increased performance by maximizing processor frequency and the disabling certain power saving features such as C-states and. Although not optimal for all environments, this is an excellent starting point for performance optimization baseline comparisons.

Dense Configuration enhances reliability features and reduces power consumption at the cost of considerable performance. This profile is targeted for operating environments where enhanced reliability is desired and temperatures may exceed the thresholds encountered in less densely-packed data centers.

This article provides -some- insight into what the C-states feature is about: http://crtech.tips/performance-mode-bios/

There are some performance vs watt comparisons in the paper, i didn't read the analysis, but at first glance it seems that only the DENSE option has significant implications. Someone with more time/technical background might be able to fill in on this.

enter image description here

  • Any idea what system profile does the EIPT tool ( dell-ui-eipt.azurewebsites.net/# ) use for its estimations? Because I am comparing a Xeon 4210 to a Xeon 4216 (on a R440), and they both have quite high power consumptions for the idle state (around 80W and 100W, respectively -- according to the tool) and the idle consumption of the system with the 4216 is quite disappointing. – user2173353 Jan 5 at 1:22
  • The PDF that you have linked shows the idle consumption to start from 70 watts for non-performance profiles and that was an estimation for 12G systems! There is now a 14G! Is the power consumption left unchanged after two server generations and is the Xeon 4216 the power-hungry monster I make it to be? – user2173353 Jan 5 at 1:22

Donno about r710, but for servers my approach is to have BIOS in performance mode and eventually let the OS manage power consumption when on low load via ACPI, cpuperf or whatever you like


I hooked up a WattsUp! meter to our R710 and I couldn't tell much of a difference between the two either at idle or at full tilt. So I left it at Maximum Performance. At idle they only draw 185 watts, full tilt I got it up to 295 watts (in our config.)


  • Great thinking. I bought a WattsUp Pro for my father last Christmas. Thanks for posting your findings. – JohnyD Oct 16 '09 at 11:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.