Would RAM upgrade for an HP 4050N LaserJet printer matter? We have this real workhorse of a Laser Printer. It's an HP 4050N and it's been in use for many years. In the past few years, I've noticed that the processing time it takes before it starts printing can take a long time. In some cases, some print queues just process so long we end up killing them and sending it to a different printer on the network.
This HP 4050N printer has a total of 16 MB of RAM. I believe it has 8 MB built-in which I suspect is on the motherboard. There are three slots for RAM. One slot has an 8 MB stick of RAM there. I've looked in the User's Guide and apparently this model can go up to a max of 200 MB of RAM.
I've seen RAM for this printer on sale very cheap in either 64 MB or 128 MB.
My question is, would upgrading the RAM on this printer by bringing the total up to 80 MB or 144 MB have a noticeable improvement on the processing time so that when printing output that contains modern graphics be worth doing? Or is RAM even the issue and it is the processing speed of the printer's CPU that's the actual bottleneck?
Update: The RAM I ordered for $10.00 (128 MB) arrived and I installed it. So the HP4050N went from having a total of 16 MB to 144 MB of RAM. I printed the test print which previously stayed in "processing" forever and never came out, but after this upgrade it printed as normal. This suit our needs. For your situation, as they say, your mileage may vary.