Today we got tow warning from intel modular server, as you see below.
How to clear this warning and how to stop warning led blinking? (i'm sure there is no problem, but can't clear/confirm the warning.)
Thank you !
Host Name: cbcmm IP Address: 192.168.1.207 Date: 3/30/2016 Time: 0:23:09 Event Id: 2925 Policy Id: 2070 Severity: Warning Type: Chassis Component: Server 2 User Name: System Description: Memory Error: Correctable ECC error with bank DIMM_F2. These are errors that occur in memory cells but are corrected by the chipset ECC engine. Probable Cause: Affected memory bank DIMM_F2. Corrective Action: Monitor the condition and replace the memory when necessary. Extra Data: s:68:"Raw IPMI (hex): Gen:3200 Num:02 Type:0c EDir:6f ED1:a0 ED2:00 ED3:31"; Host Name: cbcmm IP Address: 192.168.1.207 Date: 3/30/2016 Time: 0:23:31 Event Id: 2927 Policy Id: 1602 Severity: Warning Type: Chassis Component: Chassis User Name: System Description: Sensor: Fault Indication; The Chassis Fault LED has been illuminated. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention. Probable Cause: Chassis Sensor: Fault Indication Corrective Action: Check the events report for other warning or critical events that may be contributing to the chassis fault. Take appropriate action to clear those events and the fault LED will be turned off. Extra Data: s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:6f ED1:01 ED2:ff ED3:ff";