I am trying to create the following setup. I have a pfSense firewall with two NIC (Internet - WAN/LAN - Switch). I am setting up VLANs on the switch so I end up with 3 subnets. A subnet for servers and administrador PCs, a subnet for wireless devices, and a subnet for local computers that are always connected via an ethernet port I have set up a domain controller with AD to manage my users on I have set up my pfsense so it provides DHCP for each of the vlans. I have added the subnets to the DNS on the windows server, so any client that connects to either of the 172.16.x.x interfaces are getting a correct ip configuration setting and are able to access the mail sevice which is also running on the windows server. So far so good. The problem is that I want to secure the wifi connections with WPA2-Enterprise. I have already configured a RADIUS server on the windows server computer. I have tested it and it works, I used a wireless router with a static LAN ip address out of the DHCP scope so it works as a switch. The clients connect and the security pops up letting only users in my AD access the network. But when I change the wireless router to the subnet it is supposed to be on ( it can't communicate with the windows server running at since it is on a different subnet. So how can I accomplish this without having to move the windows server computer out of the 192.168.100.x network. I want to have a single RADIUS server. Is there something wrong with my approach? Any tips or suggestions are welcomed.

  • is your firewall an appliance or hardware? – Sum1sAdmin Apr 27 '16 at 22:45
  • Hi, sorry for the late response. I actually solved the problem already. Just added a static route to the wireless AP to my Radius server. I hadn´t noticed that capability before, my bad. Anyway thanks for your interest – hrivera Apr 30 '16 at 13:25

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.