1

I am starting out with VOIP and configuring softphones. When we sign up to a SIP provider like FlowRoute we get the credentials for a SIP Proxy. Can't we just use the SIP registration details in a softphone like Zoiper ?

Why would we want to setup a PBX? I am talking for setting up a simple system to make calls from a desktop.

Why must there be a PBX in the middle ? Why setup a PBX and add the SIP details there and configure the softphone with Asterisk ? Why not add the SIP details in the softphone directly ?

9

The PBX is going to handle all of your endpoints, your hunt groups, your schedules, your auto-attendant, call flows/trees, recordings, etc.. Your SIP provider gives you phone lines. The PBX allows you to use those phone lines. A lot of SIP providers can also provide hosted PBX services, so they handle everything.

You could set up a PBX in your office for internal communication between your employees. But if you want to attach public phone numbers and allow incoming/outgoing phone calls, you'll need to add a SIP provider.

3

If you just want a simple phone, a VoIP equivalent of just renting a single phone line and plugging a dumb phone into it, you don't need the PBX, just a Sip Trunk.

If you want the features that the PBX brings to a traditional phone line on your VoIP line, you need a PBX for that too. Some Sip Trunk provides provide a few of these features at the host end but unless you take a "Hosted PBX" type service, (in which case you still HAVE the pbx, it's just at the host end!) you won't get most of them.

  • Hunt groups
  • Call Forwarding
  • Voicemail
  • Conference calls
  • Call Recording
  • to pick on just a few of the more common...

If you don't fancy Asterisk, and you don't want to pay, check out the "free" version of 3CX, windows based soft-PBX.

2

You absolutely can do this. Whether it's appropriate for your situation is a different matter.

Essentially, SIP trunks are like POTS lines or T1/PRI trunks. They are just dial tone. They can be used (and combined) in various ways depending on the business application.

Using that analogy: You could run a individual POTS lines to each desktop (i.e. associate your softphones with raw SIP trunks). This would get you phone service at that desktop / workstation.

If you have more than one desktop, you may want to call between them, transfer calls between them, or have them ring sequential in a hunt group when an inbound call to your company (or a specific department, maybe on an extension) comes in. This is where a PBX needs to exist somewhere.

The PBX can either be on-premise (e.g. Asterisk, Avaya IP Manager, etc.) or off-premise (e.g. hosted by your SIP provider).

Some SIP providers just provide the equivalent of "dialtone" -- just trunks. These can be connected directly to endpoint devices like hardware phones, soft phones, or on-premise PBXes.

Some SIP providers also provide hosted PBX offerings. In these cases the customer doesn't have an on-premise PBX, and their endpoints are configured to point at the provider's PBX.

  • So if I register to a SIP provider like Flowroute and only want to make calls to the PSTN via flowroute there is not need for the PBX right ? I can just download something like Zoiper and add a SIP account and make calls right ? Am I correct ? – Kramer786 Sep 1 '16 at 7:39
  • I don't know about FlowRoute specifically, but yes generally ...at least for one endpoint device. – Josh Richards Sep 2 '16 at 18:00
0

If your looking at VoIP line to replace a personal line you could use this as a very basic phone line, possible for a home. You would need to see if your provider could provide voicemail or call waiting.

For a office situation you will want the free inter-PBX calling. If everyone is registering to a 3rd party that 3rd party my charge you for those interoffice calls.

Their are several providers which can provide a whole PBX managed offsite, however if your office has a large concurrent call requirement you will need to make sure your location can meet the bandwidth requirements. The biggest benefit of a off site PBX would be if you have a large remote/home office user base. If a majority of your users are in one office a on site PBX may be beneficial.

If you looking to convert to VoIP also check what e911 regulation may govern your organization, and confirm your provider can comply with these.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.