0

I have a openvpn client with two usb nic (interface). In normal situation, my client can connected to openvpn server by one interface (turning off the other nic).

How can I make the client use its both two interface connected to the vpn server? some of the configurations list below:

wlan0: 192.168.1.3 My pc is ubuntu 14.04, with Multipath TCP enabled. So it can aggregates bandwidth of two interfaces.

wlan1: 192.168.1.4

gateway: 192.168.1.1

tunnel is over tcp

other configurations are setup as default.

Thanks.

Improve this question
4
  • Your will need two openvpn connections (profiles) one with local 192.168.1.3 and another with local 192.168.1.4.
    – citrin
    Sep 1, 2016 at 20:38
  • @citrin is it possible to use one openvpn (profile)? I mean to direct all the traffic from two interface to the vpn tunnel. thanks.
    – Xiaobao Dan
    Sep 1, 2016 at 20:51
  • This isn't something you should be trying to make OpenVPN deal with. You should be looking at setting up bonding or something at layer2.
    – Zoredache
    Sep 1, 2016 at 20:56
  • @xiaobao-dan If server doesn't allow two connections from same client and server settings can't be changed, you can try to balance packets at L2 using firewall on both your PC (for outbound packets) and WiFi router (for incoming packets).
    – citrin
    Sep 2, 2016 at 13:36

0

Reset to default

You must log in to answer this question.

Browse other questions tagged .