I Have IBM Storvize SAN device , which is the ISCSI target .
The IScSi initiator on the host windows server 2012 , is showing the status as connected to the volume on the san.
When the initiator connects the volume with its correct size is visible as a new disk in the disk management application .
Status shows connected on both the target and initiator .
The same volume shared on 2 ESXI host machines (VIA direct SAS cables )as well and is accessible
The host i am trying to connect is in a remote location and is accessible over the network
However i am unable assign a drive letter for this volume and hence not able to access the data on the volume from the initiator.
Any suggestions on solving this .