1

I have a server with 2TB (Raid, 2x2TB), and this partition schema

/ => /dev/md2 - 20GB
/home => /dev/md3 - 1.8TB

This is a ISPConfig server, so we need many space in /var and almost nothing into /home, so i think that the best way to do this is put /home in /dev/md2 and /var into /dev/md3

My fstab is this:

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/md2        /       ext4    errors=remount-ro       0       1
/dev/md3        /home   ext4    defaults        1       2
/dev/sda4       swap    swap    defaults        0       0
/dev/sdb4       swap    swap    defaults        0       0

Which is the best way to do this? I think move /home contents to /homeold, remove from fstab, umount and now copy from /homeold to /home, and then change /var name (i dont have enough space to do the copy), mount new /var and move content, is this correct?

Also, i need to stop all server services to avoid errors (mysql, apache, mongodb, named, etc), any fast way to do this? Or maybe i should restart in rescue mode to do this?

Maybe another way is a full change between / and /home, i mean, put / in /md3 and /home in md2, is this possible only by edit fstab and reboot?

Thank you sou much,

  • how big is home and var dirs? Run du -hs /home/ and du -hs /var/ to see how bid they is. – Guntis Dec 19 '16 at 12:27
  • Home is 1.7GB, and /var, 6.7GB. All new content are going to be placed in /var, because is a webserver and all sites are generated there... – Carlos Lopez Infante Dec 19 '16 at 13:47
1

I think that your best friend in this case would rsync. Create directory /home/var. Sync it with existing /var directory.

rsync -avh /var/ /home/var/ --delete man rsync

When initial sync is done, do the same with /home partition.

After that you get very little downtime. Stop all services, run again rsync. Check if no files is begin used in var and home. lsof | grep '/var' and the same for /home. Here has chance that some libs is used from /var/lib. But that can be ignored. Now you have 2 options.

Option 1. mount /dev/md3 to /media/ and then symlink /media/var to /var

Option 2. move /home stuff to /home_new (except /home/var). then move all from /home/var to /home/, then remount /dev/md3 to /var, rename /home_new to /home. Make changes in fstab. Reboot server to see if all is working correctly.

I better like option 2. I also suggest You to add LVM to /dev/md3. Hope You get idea.

Similar question:

  1. https://unix.stackexchange.com/questions/131311/moving-var-home-to-separate-partition
  2. CentOS & moving /var to a new disk/partition
| improve this answer | |
  • Hi, Thank you for you support. I made everytihing and i opted for option two, but at server reboot, connection refused on SSH login. I go to rescue mode, check fstab and all appears to be right, /md2 is / and md3 is /var, i checked everything, mount partitions and all fine... do you have any idea what's going on? I dosn't have KVM on this server. Thanks! – Carlos Lopez Infante Dec 19 '16 at 17:26
  • maybe permission issue? do you have old /var directory? Can You see syslog and dmesg.log. Maybe there is some useful info. – Guntis Dec 19 '16 at 17:54
  • Apparently rsync fails at some point, because some folders was missing from new var directory, like the /var/empt/sshd was missing and some others, so i made a cp from old /var to new and now all works fine, so thank you so much! – Carlos Lopez Infante Dec 19 '16 at 18:27

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.