What's the best approach towards determining if I have a rogue DHCP server inside my network?

I'm wondering how most admins approach these kinds of problems. I found DHCP Probe through searching, and thought about trying it out. Has anyone had experience with it? (I would like to know before taking the time to compile it and install).

Do you know any useful tools or best-practices towards finding rogue DHCP servers?


16 Answers 16


One simple method is to simply run a sniffer like tcpdump/wireshark on a computer and send out a DHCP request. If you see any offers other then from your real DHCP server then you know you have a problem.

  • 31
    Helps using the following filter: "bootp.type == 2" (for only showing DHCP offers, and seeing if there is response from different/unknown sources)
    – l0c0b0x
    Jun 16, 2009 at 20:13
  • 4
    Use a program like DHCP-Find (softpedia.com/get/Network-Tools/Network-IP-Scanner/…) in conjunction with TCPDump/Wireshark to trigger DHCP responses.
    – saluce
    May 19, 2012 at 15:03
  • 2
    Can you offer a more specific solution?
    – tarabyte
    Nov 30, 2016 at 23:07
  • 4
    I was expecting more of a sequence of commands that make use of tcpdump, arp, etc. with explicit parameters and explanation of those parameters.
    – tarabyte
    Dec 1, 2016 at 0:49
  • 1
    For those wondering why bootp.type == 2 doesn't work with tcpdump (syntax error) checkout this answer serverfault.com/a/304715/101677. Mar 8, 2017 at 2:10

To recap and add to some of the other answers:

Temporarily disable your production DHCP server and see if other servers respond.

You can get the IP address of the server by running ipconfig /all on a windows machine, and then you can get the MAC address by looking for that IP address using arp -a.

On a Mac, run ipconfig getpacket en0 (or en1). See http://www.macosxhints.com/article.php?story=20060124152826491.

The DHCP server information is usually in /var/log/messages. sudo grep -i dhcp /var/log/messages*

Disabling your production DHCP server might not be a good option, of course.

Use a tool that specifically looks for rogue DHCP servers

See http://en.wikipedia.org/wiki/Rogue_DHCP for a list of tools (many of which were listed in other responses).

Configure switches to block DHCP offers

Most managed switches can be configured to prevent rogue DHCP servers:


I suggest starting two terminals, one for monitoring and another for sending a request. Terminal1 will show responses from all existing DHCP servers including MAC address. This example was run on Ubuntu:

Terminal1 (for monitoring):

sudo tcpdump -nelt udp port 68 | grep -i "boot.*reply"
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on enp2s0, link-type EN10MB (Ethernet), capture size 262144 bytes
20:a6:80:f9:12:2f > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 332: > BOOTP/DHCP, Reply, length 290
00:23:cd:c3:83:8a > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 590: > BOOTP/DHCP, Reply, length 548

Terminal2 (for sending a request):

sudo nmap --script broadcast-dhcp-discover -e eth0
Starting Nmap 7.01 ( https://nmap.org ) at 2019-10-13 21:21 EEST
Pre-scan script results:
| broadcast-dhcp-discover:
|   Response 1 of 1:
|     IP Offered:
|     DHCP Message Type: DHCPOFFER
|     IP Address Lease Time: 2h00m00s
|     Server Identifier:
|     Subnet Mask:
|     Router:
|_    Domain Name Server:,
WARNING: No targets were specified, so 0 hosts scanned.
Nmap done: 0 IP addresses (0 hosts up) scanned in 0.94 seconds

That monitoring terminal is needed just to see all responses (nmap is able to show only the first response).

  • 3
    For linux at least, unlike the noise of the accepted answer and others, this works, is simple and both tcpdump and nmap are already installed. Helped me track down rouge dhcp server on my network quickly.
    – DKebler
    Nov 12, 2020 at 20:02

dhcpdump, which takes input form tcpdump and shows only DHCP related packets. Helped me find rootkited Windows, posing as fake DHCP in our LAN.


The Wireshark / DHCP explorer / DHCP Probe approaches are good for a one time or periodic check. However, I'd recommend looking into DHCP Snooping support on your network. This feature will provide constant protection from rogue DHCP servers on the network, and is supported by many different hardware vendors.

Here's the feature set as indicated in the Cisco docs.

• Validates DHCP messages received from untrusted sources and filters out invalid messages.

• Rate-limits DHCP traffic from trusted and untrusted sources.

• Builds and maintains the DHCP snooping binding database, which contains information about untrusted hosts with leased IP addresses.

• Utilizes the DHCP snooping binding database to validate subsequent requests from untrusted hosts.


dhcploc.exe is the quickest and handiest way on Windows systems. It is available in the XP Support Tools. The Support Tools are on every OEM/retail XP disk, but may or may not be on "recovery disks" provided by some OEMs. You can also download them from MS.

It's a simple commandline tool. You run dhcploc {yourIPaddress} and then press the 'd' key to do a fake discovery. If you leave it running without pressing any keys, it will display every DHCP request and answer it hears. Press 'q' to quit.

  • Just used this in combination with killing individual switch ports to track down a sneaky rogue server we were dealing with. Good stuff!
    – DHayes
    Sep 10, 2010 at 15:44
  • 1
    You can still use DHCPloc.exe on Windows 7: 1. Download "Windows XP Service Pack 2 Support Tools" from [here][1]. 2. Right-click on the executable and select Properties->Compatibility then turn on Compatibility Mode and set it to "Windows XP (Service Pack 3)". 3. Install as normal. DHCPLoc.exe works fine on my Win7 x64 installation. [1]: microsoft.com/en-us/download/details.aspx?id=18546
    – parsley72
    Apr 29, 2012 at 23:24
  • 1
    I just noticed you can download just the executable from the following location and it works fine under Win 10 x64: gallery.technet.microsoft.com/DHCPLOC-Utility-34262d82
    – PeterJ
    Nov 4, 2016 at 1:14

Scapy is a python based packet crafting tool that is good for these sort tasks. There is an example of how to do exactly this here.

  • 3
    Wow, I find Scapy is so powerful after delving into it for several days. It surpasses the crappy tools like dhcpfind.exe and dhcploc.exe. Scapy 2.2 can run on Linux and Windows -- I tried both. The only barrier is you HAVE TO know Python programming language to quite some extent to harness its power.
    – Jimm Chen
    May 21, 2013 at 1:35
  • The link you posted is broken
    – Jason S
    Feb 10, 2015 at 20:46
  • @JasonS Hi I've updated the link, but the changing is pending peer review... While waiting you can find it here: bitbucket.org/secdev/scapy/wiki/doc/IdentifyingRogueDHCPServers
    – Huygens
    Aug 14, 2015 at 16:06
  • 1
    Scapy is locked up. There's a GitHub fork that claims to have extended functionality but has no real README or docs.
    – kaiser
    Feb 23, 2021 at 16:14

To expand on l0c0b0x's comment about using bootp.type == 2 as a filter. The bootp.type filter is only available in Wireshark/tshark. It is not available in tcpdump which the contextual location of his comment inclined me to believe.

Tshark works perfectly for this.

We have our network divided up into numerous broadcast domains, each with their own Linux-based probe with a point of presence on the "local" broadcast domain and on an administrative subnet in one fashion or another. Tshark combined with ClusterSSH allows me to easily look for DHCP traffic or (anything else for that matter) on the further flung corners of the network.

This will find DHCP replies using Linux:

# ifconfig ethX promisc
# tshark -i ethX -n port 68 -R 'bootp.type == 2'
  • Very helpful, I spent a fair bit of time trying to figure out why I was getting tcpdump: syntax error. Even posted a question on it, your answer unblocked me, thanks! networkengineering.stackexchange.com/questions/39534/… Mar 10, 2017 at 5:16
  • 1
    Also, I think something has changed with the -R <Read filter>. I get tshark: -R without -2 is deprecated. For single-pass filtering use -Y.. -Y works nicely. Mar 10, 2017 at 5:17
  • Thanks for the great help -- I just wanted to clarify things. Pop open two terminals. On Terminal #1 enter the commands above but I used the following tshark command: sudo tshark -i ethX -Y 'bootp.type == 2'. On Terminal #2 I entered the following command: sudo nmap --script broadcast-dhcp-discover -e ethX. The dhcp servers responding to the dhcp request should be listed within Terminal #1.
    – KevDog
    Feb 4 at 17:48

once you've established that there's a rogue dhcp server on the network I found the quickest way to resolve it was...

Send an email round to the whole company saying:

"which one of you has added a wireless router into the LAN, you've killed the internet for everyone else"

expect a sheepish response, or the conflicting device to disappear, quickly :)


Disable the main DHCP server and (re)configure a connection.

If you get an IP address, you've got a rogue.

If you have a Linux handy, the standard dhcpclient tells you the IP address of the DHCP server (else you can sniff the traffic to see where the DHCP response came from).

  • 2
    While this would of course work, stopping a production DHCP server is probably not the best approach if you are actually concerned about providing the service...
    – Massimo
    Feb 14, 2012 at 11:04
  • 3
    Depends on the amount of people you are serving. You can disrupt the service for a couple of minutes in most cases and nobody will notice, especially in the middle of the day when most people have their lease already.
    – Vinko Vrsalovic
    Feb 16, 2012 at 11:44

There are several ways, if your running a small network the simplest way is to turn off / disable / un-plug your dhcp server and then run ipconfig /renew or similar on a client and if you obtain and IP you have something rougue on your network.

Another way would be to use Wireshark packet capturer/analyser to look at your network traffic and find DHCP connections, there is a lab worksheet on how do do this avaliable from here.

There are also a number of utilies avaliable which proport to do this one is DHCP explorer another is DHCP probe which you mentioned in your original post.


on debian/ubuntu one also has the options to use dhcpdump and/or tcpdump with the help of e.g. dhclient

Use dhcpdump:

  • 1.a) run dhcpdump -i eth0 in one shell/shell (eth0 or the name of your interface)
  • 1.b) start dhclient in another shell (it doesn't have to run successfully)
  • 1.c) look into the output of dhcpdump for information (it should be a nice formatted, informative list of the most details)

Option 2 if you dont like to use dhcpdump:

  • 2.a) run tcpdump -i eth0 -t -n > /tmp/my_file.txt in one shell/window
    (optional: -t = disable timestamp // -n = disable name-resolution, just IP-address, no servernames (for RHEL/centos use -nn) )
  • 2.b) start dhclient in another shell (it doesn't have to run successfully)
  • 2.c) stop the running tcpdump ()
  • 2.d) examine the file /tmp/my_file.txt with your favorite editor and search for things like: ".53 " (the default DNS port) / "NX" / "CNAME" / "A?" / "AAAA" -

*sidenote: tcpdump and dhcpdump probably have to be installed (e.g.: sudo apt get install tcpdump dhcpdump); dhcpdump depends on tcpdump


You could do a ping sweep of your networks and then compare that to the number of DHCP leases handed out by your DHCP server.

You need to have a general idea of the number of static devices (router interfaces and printers perhaps) which will skew this number slightly, but this should be a quick and accurate way of identifying them across multiple networks.


Under OSX (and I suspect Linux), this is what I did:

tcpdump -i en0 -n port 67 or port 68

You will need to change the en0 to be the name of your interface. Once I made a DHCP request (by clicking Renew DHCP Lease in the advanced section of the Network System Preferences panel), I saw something like the follwing:

15:59:17.843 IP > BOOTP/DHCP, Request from 6:b:5:9:f:3, \
        length 300
15:59:17.847 IP > BOOTP/DHCP, Reply, length 309

Port 67 is listed in my /etc/services as "bootps" Bootstrap Protocol Server.

Turning off your primary DHCP server may be needed to see any other network devices that are inappropriately responding to DHCP requests.


On linux, after playing with many tools, following is the only thing that worked reliably (On a RHEL8 based system)

In this case:

  • interface name is eth0.
  • eth0-static is my static IP configuration, active by default
  • eth0-dhcp is the dynamic IP configuration

# Define the servers already known in your network

# On the background, dump all DHCP calls other then requests, ignore known servers
tcpdump -i eth0 -n port 67 or 68  2> dhcp.err|grep -v Request| grep -v "$known_servers" > dhcp.log &

# Disable static IP
nmcli con down eth0-static 2>&1 > /dev/null
sleep 2

# Enable the connection that will do dhcp request
nmcli con up eth0-dhcp 2>&1 > /dev/null
sleep 2

# Re-enable the static IP, to go back to original IP.
nmcli con up eth0-static 2>&1 > /dev/null

# Kill tcpdump
pkill tcpdump

# Print results
cat dhcp.log

Say there is another rouge server with IP on your network, output file will look like:

11:51:53.583149 IP > .bootpc: BOOTP/DHCP, Reply, length 317 11:51:53.583271 IP > .bootpc: BOOTP/DHCP, Reply, length 307

Also, do not disable your main DHCP server just to find other ones ;)

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .